2026 BMW M2 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 BMW M2 is 5x112. It has a center bore of 66.6 mm, an offset range of 20-25, and utilizes 14x1.25 (Cone seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2026 BMW M2 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 20-25 |
| Thread Size (Lug Nut / Bolt) | 14x1.25 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2026 M2 — Year-Specific Fitment Context
The 2026 model year is the final year of the BMW M2's 5x112 bolt pattern run (since 2019). Wheels from any 2019–2026 BMW M2 are cross-compatible with the 2026 model. Across its full production run (2016–2026), the M2 has also used: 5x120.
BMW M2 Bolt Pattern by Year
Looking for all generations? View the complete BMW M2 (2016–2026) Bolt Pattern & Generation Guide →
The table below shows how the M2's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 BMW M2 Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 BMW M2, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 McLaren 750S | 66.5 mm (Exact) | Front: +32mm, Rear: +40mm | 14x1.5 (Ball) |
| 2022 Mercedes-Benz A-Class | 66.6 mm (Exact) | 30-50 | 14x1.5 (Ball) |
| 2025 Mercedes-Benz AMG GT | 66.5 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2017 Mercedes-Benz B-Class | 66.6 mm (Exact) | 49 | B 14x1.50 (Ball) |
| 2025 Mercedes-Benz C-Class | 66.6 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2019 Mercedes-Benz CLA | 66.6 mm (Exact) | 49 | B 14x1.50 (Ball) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 BMW M2 — Frequently Asked Questions
What is the bolt pattern for a 2026 BMW M2?
The 2026 BMW M2 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 20-25mm.
What other years of BMW M2 have the same bolt pattern as the 2026?
The BMW M2 uses the 5x112 pattern from 2019 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the PCD for a 2026 BMW M2?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 M2, the PCD is 5x112.
Why is matching the 66.6mm center bore important for the 2026 M2?
The 66.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2026 BMW M2?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 20-25mm, and a center bore of at least 66.6mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2026 BMW M2?
Refer to your owner's manual for exact specs, but always tighten the 14x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →