2011 BMW X6 M Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 BMW X6 M, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.25 |
| Center Bore (CB) | 74.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2011 X6 M — Year-Specific Fitment Context
The 2011 BMW X6 M is in year 2 of 9 using the 5x120 pattern (2010–2018). Wheels from any 2010–2018 BMW X6 M are cross-compatible with the 2011 model. Across its full production run (2010–2024), the X6 M has also used: 5x112.
BMW X6 M Bolt Pattern by Year
The table below shows how the X6 M's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2010 | 5x120 | 74.1 | 46 |
| ▸ 2011 | 5x120 | 74.1 | 46 |
| 2012 | 5x120 | 74.1 | 46 |
| 2013 | 5x120 | 74.1 | 46 |
| 2014 | 5x120 | 74.1 | 46 |
| 2015 | 5x120 | 74.1 | 46 |
| 2016 | 5x120 | 74.1 | 46 |
| 2017 | 5x120 | 74.1 | 46 |
| 2018 | 5x120 | 72.56 | 30-40 |
| 2019 | 5x112 | 66.6 | 25-40 |
| 2021 | 5x112 | 66.6 | 25-40 |
| 2022 | 5x112 | 66.6 | 25-40 |
| 2024 | 5x112 | 66.6 | 25-40 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2011 BMW X6 M
For your 2011 BMW X6 M, the 5x120 bolt pattern and 74.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 74.1mm or 72.6mm); use hub-centric rings to ensure proper centering and prevent vibrations. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.25) and seat type—BMW uses ball seats; using incorrect taper (conical) seats can lead to loose wheels. Re-torque after 50-100 miles. Wheels from 2010-2018 X6 M are direct fit.
Historical Fitment Data Reference
In our dataset, BMW X6 M appears from 2010 to 2024 (13 model years). Across model years, this model appears with 2 bolt patterns (5x112, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 86.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 lb-ft (140 Nm) after 50-100 miles of driving.
- ✅ Avoid using conical seat lug nuts on BMW ball-seat wheels; always match seat type.
- ✅ Check inner clearance for offset changes: a lower offset (e.g., 40mm) may require fender rolling or spacers.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 BMW X6 M — Frequently Asked Questions
What is the bolt pattern for a 2011 BMW X6 M?
The 2011 BMW X6 M uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 74.1mm and the offset is 46mm.
What other years of BMW X6 M have the same bolt pattern as the 2011?
The BMW X6 M uses the 5x120 pattern from 2010 through 2018. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2011 BMW X6 M?
Refer to your owner's manual for exact specs, but always tighten the B 14x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2011 BMW X6 M use?
The 2011 BMW X6 M uses B 14x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2011 BMW X6 Ms use lug bolts or lug nuts?
The 2011 X6 M requires B 14x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2011 BMW X6 M?
The factory center bore (hub bore) for the 2011 BMW X6 M is 74.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset