2002 BMW Z3 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 BMW Z3, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 72.6 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2002 Z3 — Year-Specific Fitment Context
The 2002 model year is the final year of the BMW Z3's 5x120 bolt pattern run (since 1996). Wheels from any 1996–2002 BMW Z3 are cross-compatible with the 2002 model.
BMW Z3 Bolt Pattern by Year
The table below shows how the Z3's wheel specifications have changed over the years. The 2002 model year is highlighted.
Fitment Notes
The 2002 BMW Z3 has a bolt pattern of 5x120.
This means it is a 5 lug pattern with a circle diameter of 120mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, BMW Z3 appears from 1996 to 2002 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
2002 BMW Z3 — Frequently Asked Questions
What is the bolt pattern for a 2002 BMW Z3?
The 2002 BMW Z3 uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.6mm and the offset is 42mm.
What other years of BMW Z3 have the same bolt pattern as the 2002?
The BMW Z3 uses the 5x120 pattern from 1996 through 2002. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
What is the PCD for a 2002 BMW Z3?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2002 Z3, the PCD is 5x120.
Can I use spacers on my 2002 BMW Z3?
Yes, but ensure the wheel spacers match the 5x120 bolt pattern and 72.6mm center bore. Also verify that you have enough thread engagement for your B 12x1.50 hardware.
What lug nut size does the 2002 BMW Z3 use?
The 2002 BMW Z3 uses B 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2002 BMW Z3?
The factory center bore (hub bore) for the 2002 BMW Z3 is 72.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
BMW Z3 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1996-2002 (7 model years).
- Observed bolt-pattern variants: 1 (5x120).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2002 BMW Z3, please report it via our About page contact so we can verify and update this record.