2019 Buick Cascada Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Buick Cascada, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 70.2 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2019 Cascada — Year-Specific Fitment Context
The 2019 model year is the final year of the Buick Cascada's 5x115 bolt pattern run (since 2016). Wheels from any 2016–2019 Buick Cascada are cross-compatible with the 2019 model.
Buick Cascada Bolt Pattern by Year
The table below shows how the Cascada's wheel specifications have changed over the years. The 2019 model year is highlighted.
Fitment Notes
The 2019 Buick Cascada has a bolt pattern of 5x115.
This means it is a 5 lug pattern with a circle diameter of 115mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Buick Cascada appears from 2016 to 2019 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 86.0 mm
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
2019 Buick Cascada — Frequently Asked Questions
What is the bolt pattern for a 2019 Buick Cascada?
The 2019 Buick Cascada uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.2mm and the offset is 35-45mmmm.
What other years of Buick Cascada have the same bolt pattern as the 2019?
The Buick Cascada uses the 5x115 pattern from 2016 through 2019. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What lug nut size does the 2019 Buick Cascada use?
The 2019 Buick Cascada uses M12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2019 Buick?
The 2019 Cascada uses a 5x115 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2019 Buick Cascada?
The OEM offset for the 2019 Cascada is typically around 35-45mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2019 Buick Cascada?
Yes, but ensure the wheel spacers match the 5x115 bolt pattern and 70.2mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Buick Cascada is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2016-2019 (4 model years).
- Observed bolt-pattern variants: 1 (5x115).
- Observed total offset span across years: 86.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2019 Buick Cascada, please report it via our About page contact so we can verify and update this record.