2000 Chevrolet Impala Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Chevrolet Impala, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 44 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2000 Impala — Year-Specific Fitment Context
The 2000 model year marks the beginning of the Chevrolet Impala's 5x115 bolt pattern era, which continued through 2011 (12 consecutive years). Wheels from any 2000–2011 Chevrolet Impala are cross-compatible with the 2000 model. Across its full production run (1994–2020), the Impala has also used: 5x120, 5x127.
Chevrolet Impala Bolt Pattern by Year
The table below shows how the Impala's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x127 | 78.3 | 8 |
| 1995 | 5x127 | 78.3 | 8 |
| 1996 | 5x127 | 78.3 | 8 |
| ▸ 2000 | 5x115 | 70.3 | 44 |
| 2001 | 5x115 | 70.3 | 44 |
| 2002 | 5x115 | 70.3 | 44 |
| 2003 | 5x115 | 70.3 | 44 |
| 2004 | 5x115 | 70.3 | 44 |
| 2005 | 5x115 | 70.3 | 44 |
| 2006 | 5x115 | 70.3 | 44 |
| 2007 | 5x115 | 70.3 | 44 |
| 2008 | 5x115 | 70.3 | 44 |
| 2009 | 5x115 | 70.3 | 44 |
| 2010 | 5x115 | 70.3 | 44 |
| 2011 | 5x115 | 70.3 | 44 |
| 2012 | 5x120 | 66.9 | 42 |
| 2013 | 5x120 | 66.9 | 42 |
| 2014 | 5x120 | 66.9 | 42 |
| 2015 | 5x120 | 66.9 | 42 |
| 2016 | 5x120 | 66.9 | 42 |
| 2017 | 5x120 | 66.9 | 42 |
| 2018 | 5x120 | 66.9 | 42 |
| 2019 | 5x120 | 66.9 | 40 |
| 2020 | 5x120 | 66.9 | 40 |
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2000 Chevrolet Impala
For your 2000 Chevrolet Impala, the bolt pattern is 5x115 with a 70.3mm center bore and 44mm offset. When selecting aftermarket wheels, hub-centric rings are essential to match the 70.3mm bore, preventing vibrations. The offset is sensitive; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and proper seat type (cone or ball) to ensure safe clamping. Re-torque after 50-100 miles. Wheels from 2000-2011 Impalas are direct fit, but avoid 5x120 or 5x127 patterns from other years.
Historical Fitment Data Reference
In our dataset, Chevrolet Impala appears from 1994 to 2020 (24 model years). Across model years, this model appears with 3 bolt patterns (5x115, 5x120, 5x127).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 36.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ✅ Use hub-centric rings (70.3mm ID to aftermarket bore) to prevent vibrations.
- ✅ Verify offset is within 44mm ±5mm to avoid brake caliper or fender contact.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Chevrolet Impala — Frequently Asked Questions
What is the bolt pattern for a 2000 Chevrolet Impala?
The 2000 Chevrolet Impala uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 44mm.
What other years of Chevrolet Impala have the same bolt pattern as the 2000?
The Chevrolet Impala uses the 5x115 pattern from 2000 through 2011. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Do 2000 Chevrolet Impalas use lug bolts or lug nuts?
The 2000 Impala requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2000 Chevrolet Impala?
Absolutely. Just ensure the aftermarket wheels have a 5x115 bolt pattern, an offset near 44mm, and a center bore of at least 70.3mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2000 Chevrolet Impala?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 44mm offset mean for the 2000 Impala?
An offset of 44mm means the wheel's mounting surface is 44mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chevrolet.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset