2019 Cadillac ATS Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Cadillac ATS, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2019 ATS — Year-Specific Fitment Context
The 2019 model year is the final year of the Cadillac ATS's 5x115 bolt pattern run (since 2013). Wheels from any 2013–2019 Cadillac ATS are cross-compatible with the 2019 model.
Cadillac ATS Bolt Pattern by Year
The table below shows how the ATS's wheel specifications have changed over the years. The 2019 model year is highlighted.
Fitment Notes
The 2019 Cadillac ATS has a bolt pattern of 5x115.
This means it is a 5 lug pattern with a circle diameter of 115mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Cadillac ATS appears from 2013 to 2019 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
2019 Cadillac ATS — Frequently Asked Questions
What is the bolt pattern for a 2019 Cadillac ATS?
The 2019 Cadillac ATS uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 42mm.
What other years of Cadillac ATS have the same bolt pattern as the 2019?
The Cadillac ATS uses the 5x115 pattern from 2013 through 2019. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Can I use spacers on my 2019 Cadillac ATS?
Yes, but ensure the wheel spacers match the 5x115 bolt pattern and 70.3mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
How do I measure the bolt pattern on my 2019 Cadillac?
The 2019 ATS uses a 5x115 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2019 Cadillac ATS?
The factory center bore (hub bore) for the 2019 Cadillac ATS is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 70.3mm center bore important for the 2019 ATS?
The 70.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Cadillac ATS is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2013-2019 (7 model years).
- Observed bolt-pattern variants: 1 (5x115).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2019 Cadillac ATS, please report it via our About page contact so we can verify and update this record.