2017 Cadillac ATS Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Cadillac ATS, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2017 ATS — Year-Specific Fitment Context
The 2017 Cadillac ATS is in year 5 of 7 using the 5x115 pattern (2013–2019). Wheels from any 2013–2019 Cadillac ATS are cross-compatible with the 2017 model.
Cadillac ATS Bolt Pattern by Year
The table below shows how the ATS's wheel specifications have changed over the years. The 2017 model year is highlighted.
Fitment Notes
The 2017 Cadillac ATS has a bolt pattern of 5x115.
This means it is a 5 lug pattern with a circle diameter of 115mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Cadillac ATS appears from 2013 to 2019 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
2017 Cadillac ATS — Frequently Asked Questions
What is the bolt pattern for a 2017 Cadillac ATS?
The 2017 Cadillac ATS uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 42mm.
What other years of Cadillac ATS have the same bolt pattern as the 2017?
The Cadillac ATS uses the 5x115 pattern from 2013 through 2019. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
What does 42mm offset mean for the 2017 ATS?
An offset of 42mm means the wheel's mounting surface is 42mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Cadillac.
How tight should I torque the lug nuts on a 2017 Cadillac ATS?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2017 Cadillac ATSs use lug bolts or lug nuts?
The 2017 ATS requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2017 Cadillac ATS?
The OEM offset for the 2017 ATS is typically around 42mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Cadillac ATS is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2013-2019 (7 model years).
- Observed bolt-pattern variants: 1 (5x115).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2017 Cadillac ATS, please report it via our About page contact so we can verify and update this record.