2008 Chevrolet Impala Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Chevrolet Impala, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 44 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 Impala — Year-Specific Fitment Context
The 2008 Chevrolet Impala is in year 9 of 12 using the 5x115 pattern (2000–2011). Wheels from any 2000–2011 Chevrolet Impala are cross-compatible with the 2008 model. Across its full production run (1994–2020), the Impala has also used: 5x120, 5x127.
Chevrolet Impala Bolt Pattern by Year
The table below shows how the Impala's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x127 | 78.3 | 8 |
| 1995 | 5x127 | 78.3 | 8 |
| 1996 | 5x127 | 78.3 | 8 |
| 2000 | 5x115 | 70.3 | 44 |
| 2001 | 5x115 | 70.3 | 44 |
| 2002 | 5x115 | 70.3 | 44 |
| 2003 | 5x115 | 70.3 | 44 |
| 2004 | 5x115 | 70.3 | 44 |
| 2005 | 5x115 | 70.3 | 44 |
| 2006 | 5x115 | 70.3 | 44 |
| 2007 | 5x115 | 70.3 | 44 |
| ▸ 2008 | 5x115 | 70.3 | 44 |
| 2009 | 5x115 | 70.3 | 44 |
| 2010 | 5x115 | 70.3 | 44 |
| 2011 | 5x115 | 70.3 | 44 |
| 2012 | 5x120 | 66.9 | 42 |
| 2013 | 5x120 | 66.9 | 42 |
| 2014 | 5x120 | 66.9 | 42 |
| 2015 | 5x120 | 66.9 | 42 |
| 2016 | 5x120 | 66.9 | 42 |
| 2017 | 5x120 | 66.9 | 42 |
| 2018 | 5x120 | 66.9 | 42 |
| 2019 | 5x120 | 66.9 | 40 |
| 2020 | 5x120 | 66.9 | 40 |
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2008 Chevrolet Impala
For your 2008 Chevrolet Impala, the bolt pattern is 5x115 with a center bore of 70.3mm. When selecting aftermarket wheels, ensure they have a center bore of at least 70.3mm or use hub-centric rings to prevent vibrations. The factory offset is 44mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree). Using incorrect lug nuts can lead to wheel loosening. Cross-compatible wheels from 2000–2011 Impalas fit directly, but verify offset and bore.
Historical Fitment Data Reference
In our dataset, Chevrolet Impala appears from 1994 to 2020 (24 model years). Across model years, this model appears with 3 bolt patterns (5x115, 5x120, 5x127).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 36.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with a center bore smaller than 70.3mm; hub-centric rings are mandatory for larger bores.
- ✅ Check for caliper clearance when using wheels with offset below 40mm or above 48mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Chevrolet Impala — Frequently Asked Questions
What is the bolt pattern for a 2008 Chevrolet Impala?
The 2008 Chevrolet Impala uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 44mm.
What other years of Chevrolet Impala have the same bolt pattern as the 2008?
The Chevrolet Impala uses the 5x115 pattern from 2000 through 2011. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I use spacers on my 2008 Chevrolet Impala?
Yes, but ensure the wheel spacers match the 5x115 bolt pattern and 70.3mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Why is matching the 70.3mm center bore important for the 2008 Impala?
The 70.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does 44mm offset mean for the 2008 Impala?
An offset of 44mm means the wheel's mounting surface is 44mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chevrolet.
What is the factory wheel offset for a 2008 Chevrolet Impala?
The OEM offset for the 2008 Impala is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset