2007 Chevrolet Impala Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Chevrolet Impala, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 44 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 Impala — Year-Specific Fitment Context
The 2007 Chevrolet Impala is in year 8 of 12 using the 5x115 pattern (2000–2011). Wheels from any 2000–2011 Chevrolet Impala are cross-compatible with the 2007 model. Across its full production run (1994–2020), the Impala has also used: 5x120, 5x127.
Chevrolet Impala Bolt Pattern by Year
The table below shows how the Impala's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x127 | 78.3 | 8 |
| 1995 | 5x127 | 78.3 | 8 |
| 1996 | 5x127 | 78.3 | 8 |
| 2000 | 5x115 | 70.3 | 44 |
| 2001 | 5x115 | 70.3 | 44 |
| 2002 | 5x115 | 70.3 | 44 |
| 2003 | 5x115 | 70.3 | 44 |
| 2004 | 5x115 | 70.3 | 44 |
| 2005 | 5x115 | 70.3 | 44 |
| 2006 | 5x115 | 70.3 | 44 |
| ▸ 2007 | 5x115 | 70.3 | 44 |
| 2008 | 5x115 | 70.3 | 44 |
| 2009 | 5x115 | 70.3 | 44 |
| 2010 | 5x115 | 70.3 | 44 |
| 2011 | 5x115 | 70.3 | 44 |
| 2012 | 5x120 | 66.9 | 42 |
| 2013 | 5x120 | 66.9 | 42 |
| 2014 | 5x120 | 66.9 | 42 |
| 2015 | 5x120 | 66.9 | 42 |
| 2016 | 5x120 | 66.9 | 42 |
| 2017 | 5x120 | 66.9 | 42 |
| 2018 | 5x120 | 66.9 | 42 |
| 2019 | 5x120 | 66.9 | 40 |
| 2020 | 5x120 | 66.9 | 40 |
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2007 Chevrolet Impala
For your 2007 Chevrolet Impala, the bolt pattern is 5x115 with a center bore of 70.3mm. When selecting aftermarket wheels, ensure they have a larger center bore and use hub-centric rings to prevent vibrations and ensure proper load distribution. The factory offset is 44mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the thread pitch is 12x1.50, and the seat type must match (conical seat is standard). Using incorrect lug nuts can lead to wheel detachment. Wheels from 2000–2011 Impalas are direct fit, but avoid earlier or later models with different patterns (5x120, 5x127).
Historical Fitment Data Reference
In our dataset, Chevrolet Impala appears from 1994 to 2020 (24 model years). Across model years, this model appears with 3 bolt patterns (5x115, 5x120, 5x127).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 36.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lb after 50 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check brake caliper clearance when changing offset or wheel diameter; the 2007 Impala has limited space.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Chevrolet Impala — Frequently Asked Questions
What is the bolt pattern for a 2007 Chevrolet Impala?
The 2007 Chevrolet Impala uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 44mm.
What other years of Chevrolet Impala have the same bolt pattern as the 2007?
The Chevrolet Impala uses the 5x115 pattern from 2000 through 2011. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Will wheels from another Chevrolet fit my 2007 Impala?
Only if they share the exact same 5x115 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
What is the center bore of a 2007 Chevrolet Impala?
The factory center bore (hub bore) for the 2007 Chevrolet Impala is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2007 Chevrolet Impala?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2007 Chevrolet Impala use?
The 2007 Chevrolet Impala uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset