2014 Buick Encore Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2014 Buick Encore is 5x105. It has a center bore of 56.6 mm, an offset range of 38, and utilizes N 12x1.50 (Cone seat, 19mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2014 Buick Encore Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x105 |
|---|---|
| Center Bore (Hub Bore) | 56.6 mm |
| Offset Range (ET) | 38 |
| Thread Size (Lug Nut / Bolt) | N 12x1.50 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
2014 Encore — Year-Specific Fitment Context
The 2014 Buick Encore is in year 2 of 11 using the 5x105 pattern (2013–2023). Wheels from any 2013–2023 Buick Encore are cross-compatible with the 2014 model.
Buick Encore Bolt Pattern by Year
The table below shows how the Encore's wheel specifications have changed over the years. The 2014 model year is highlighted.
2014 Buick Encore Wheel Interchange & Donor Fitment Guide (5x105)
The 5x105 bolt pattern is shared by 50 vehicles in our database (uncommon). For safe wheel swaps on the 2014 Buick Encore, donor rims must match the 5x105 PCD and have a center bore of at least 56.6 mm:
DIRECT HUB MATCH Same 5x105 Pattern & Exact 56.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2014 Chevrolet Sonic | 56.6 mm (Exact) | 40 | N 12x1.50 (Cone) |
| 2015 Chevrolet Trax | 56.6 mm (Exact) | 39 | N 12x1.50 (Cone) |
| 2019 Chevrolet Volt | 56.6 mm (Exact) | 38-42mm | M12x1.5 (Cone) |
| 2022 Chevrolet Bolt EUV | 56.6 mm (Exact) | 38-42mm | M12x1.5 (Cone) |
| 2017 Chevrolet Bolt EV | 56.6 mm (Exact) | 40 | 12x1.5 (Cone) |
| 2011 Chevrolet Cruze | 56.6 mm (Exact) | 39 | N 12x1.50 (Cone) |
Expert Buying Guide for 2014 Buick Encore
For your 2014 Buick Encore, the 5x105 bolt pattern and 56.6mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 38mm; deviating more than ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (cone or ball) to avoid wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully for brake caliper clearance.
Historical Fitment Data Reference
In our dataset, Buick Encore appears from 2013 to 2023 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and wheel separation.
- ✅ If lowering the vehicle, consider a higher offset (e.g., 42mm) to prevent tire rub on fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
2014 Buick Encore — Frequently Asked Questions
What is the bolt pattern for a 2014 Buick Encore?
The 2014 Buick Encore uses a 5x105 bolt pattern (also called lug pattern or PCD). The center bore is 56.6mm and the offset is 38mm.
What other years of Buick Encore have the same bolt pattern as the 2014?
The Buick Encore uses the 5x105 pattern from 2013 through 2023. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What does 38mm offset mean for the 2014 Encore?
An offset of 38mm means the wheel's mounting surface is 38mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Buick.
Do 2014 Buick Encores use lug bolts or lug nuts?
The 2014 Encore requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2014 Buick Encore?
The factory center bore (hub bore) for the 2014 Buick Encore is 56.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2014 Buick Encore?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 Encore, the PCD is 5x105.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →