2026 Buick Envista Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Buick Envista is 5x115. It has a center bore of 70.2 mm, an offset range of 38-42, and utilizes 12x1.5 (Ball seat, 19mm hex) fasteners tightened to 100 ft-lbs (140 Nm).
2026 Buick Envista Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Center Bore (Hub Bore) | 70.2 mm |
| Offset Range (ET) | 38-42 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 100 ft-lbs (140 Nm) |
2026 Envista — Year-Specific Fitment Context
The 2026 model year is the final year of the Buick Envista's 5x115 bolt pattern run (since 2024). Wheels from any 2024–2026 Buick Envista are cross-compatible with the 2026 model.
Buick Envista Bolt Pattern by Year
Looking for all generations? View the complete Buick Envista (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Envista's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Buick Envista Wheel Interchange & Donor Fitment Guide (5x115)
The 5x115 bolt pattern is shared by 473 vehicles in our database (moderately common). For safe wheel swaps on the 2026 Buick Envista, donor rims must match the 5x115 PCD and have a center bore of at least 70.2 mm:
DIRECT HUB MATCH Same 5x115 Pattern & Exact 70.2mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2016 Chevrolet Malibu Limited | 70.3 mm (Exact) | 40 | 12x1.5 (Cone) |
| 2024 Chevrolet TrailBlazer | 70.2 mm (Exact) | 50 | 12x1.5 (Cone) |
| 2024 Chevrolet Trax | 70.2 mm (Exact) | 40-46 | 12x1.5 (Cone) |
| 2018 GMC Terrain | 70.3 mm (Exact) | 40 | 12x1.5 (Cone) |
| 1998 Oldsmobile Cutlass | 70.3 mm (Exact) | 42 | N 12x1.50 (Cone) |
| 2000 Pontiac Grand Am | 70.3 mm (Exact) | 42 | N 12x1.50 (Cone) |
HUB RING FITMENT Same 5x115 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2005 Chrysler 300 | 71.6 mm | 71.6mm → 70.2mm |
24 |
| 2010 Dodge Charger | 71.5 mm | 71.5mm → 70.2mm |
22 |
| 2006 Cadillac STS | 71.6 mm | 71.6mm → 70.2mm |
42 |
| 2005 Dodge Magnum | 71.6 mm | 71.6mm → 70.2mm |
22 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Buick Envista — Frequently Asked Questions
What is the bolt pattern for a 2026 Buick Envista?
The 2026 Buick Envista uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.2mm and the offset is 38-42mm.
What other years of Buick Envista have the same bolt pattern as the 2026?
The Buick Envista uses the 5x115 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the center bore of a 2026 Buick Envista?
The factory center bore (hub bore) for the 2026 Buick Envista is 70.2mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2026 Buick Envista?
Absolutely. Just ensure the aftermarket wheels have a 5x115 bolt pattern, an offset near 38-42mm, and a center bore of at least 70.2mm (using hub rings if larger).
What does 38-42mm offset mean for the 2026 Envista?
An offset of 38-42mm means the wheel's mounting surface is 38-42mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Buick.
What is the factory wheel offset for a 2026 Buick Envista?
The OEM offset for the 2026 Envista is typically around 38-42mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →