2006 Buick Rendezvous Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Buick Rendezvous, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2006 Rendezvous — Year-Specific Fitment Context
The 2006 Buick Rendezvous is in year 5 of 6 using the 5x115 pattern (2002–2007). Wheels from any 2002–2007 Buick Rendezvous are cross-compatible with the 2006 model.
Buick Rendezvous Bolt Pattern by Year
The table below shows how the Rendezvous's wheel specifications have changed over the years. The 2006 model year is highlighted.
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2006 Buick Rendezvous
For your 2006 Buick Rendezvous, the 5x115 bolt pattern and 70.3mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive; stock is 45mm, but a ±5mm deviation is acceptable. Exceeding this may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree). Using incorrect lug nuts can lead to wheel loosening. For safety, re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Buick Rendezvous appears from 2002 to 2007 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ✅ Ensure aftermarket wheels have a center bore ≥70.3mm; use hub-centric rings if larger.
- ✅ Avoid offsets below 40mm or above 50mm to prevent rubbing on suspension or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Buick Rendezvous — Frequently Asked Questions
What is the bolt pattern for a 2006 Buick Rendezvous?
The 2006 Buick Rendezvous uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 45mm.
What other years of Buick Rendezvous have the same bolt pattern as the 2006?
The Buick Rendezvous uses the 5x115 pattern from 2002 through 2007. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Will wheels from another Buick fit my 2006 Rendezvous?
Only if they share the exact same 5x115 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
What lug nut size does the 2006 Buick Rendezvous use?
The 2006 Buick Rendezvous uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2006 Buick Rendezvous?
The OEM offset for the 2006 Rendezvous is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2006 Buick Rendezvous?
Yes, but ensure the wheel spacers match the 5x115 bolt pattern and 70.3mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset