1997 Buick Riviera Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Buick Riviera, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1997 Riviera — Year-Specific Fitment Context
The 1997 Buick Riviera is in year 6 of 8 using the 5x115 pattern (1992–1999). Wheels from any 1992–1999 Buick Riviera are cross-compatible with the 1997 model.
Buick Riviera Bolt Pattern by Year
The table below shows how the Riviera's wheel specifications have changed over the years. The 1997 model year is highlighted.
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 1997 Buick Riviera
For your 1997 Buick Riviera, the 5x115 bolt pattern and 70.3mm center bore are critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch: 12x1.5mm. Use conical (60-degree) or ball-seat lug nuts matching the wheel's seat type. Improper seating can lead to wheel loss. Re-torque after 50-100 miles. Wheels from 1992-1999 Rivieras are direct fit.
Historical Fitment Data Reference
In our dataset, Buick Riviera appears from 1992 to 1999 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 70.3mm to avoid vibration.
- ✅ Stick to offset between 40-50mm; lower offsets may rub the fender, higher offsets may contact suspension.
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving, and check periodically for loosening.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Buick Riviera — Frequently Asked Questions
What is the bolt pattern for a 1997 Buick Riviera?
The 1997 Buick Riviera uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 45mm.
What other years of Buick Riviera have the same bolt pattern as the 1997?
The Buick Riviera uses the 5x115 pattern from 1992 through 1999. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
What is the PCD for a 1997 Buick Riviera?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1997 Riviera, the PCD is 5x115.
Do 1997 Buick Rivieras use lug bolts or lug nuts?
The 1997 Riviera requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Buick fit my 1997 Riviera?
Only if they share the exact same 5x115 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
How do I measure the bolt pattern on my 1997 Buick?
The 1997 Riviera uses a 5x115 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset