1997 Cadillac Catera Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Cadillac Catera, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x110 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1997 Catera — Year-Specific Fitment Context
The 1997 model year marks the beginning of the Cadillac Catera's 5x110 bolt pattern era, which continued through 2001 (5 consecutive years). Wheels from any 1997–2001 Cadillac Catera are cross-compatible with the 1997 model.
Cadillac Catera Bolt Pattern by Year
The table below shows how the Catera's wheel specifications have changed over the years. The 1997 model year is highlighted.
Fitment Notes
The 1997 Cadillac Catera has a bolt pattern of 5x110.
This means it is a 5 lug pattern with a circle diameter of 110mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Cadillac Catera appears from 1997 to 2001 (5 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x110 Pattern Context
This bolt pattern appears on 126 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x110:
1997 Cadillac Catera — Frequently Asked Questions
What is the bolt pattern for a 1997 Cadillac Catera?
The 1997 Cadillac Catera uses a 5x110 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 42mm.
What other years of Cadillac Catera have the same bolt pattern as the 1997?
The Cadillac Catera uses the 5x110 pattern from 1997 through 2001. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
What does 42mm offset mean for the 1997 Catera?
An offset of 42mm means the wheel's mounting surface is 42mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Cadillac.
How do I measure the bolt pattern on my 1997 Cadillac?
The 1997 Catera uses a 5x110 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 1997 Cadillac Catera use?
The 1997 Cadillac Catera uses B 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 1997 Cadillac Catera?
The factory center bore (hub bore) for the 1997 Cadillac Catera is 65.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Cadillac Catera is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1997-2001 (5 model years).
- Observed bolt-pattern variants: 1 (5x110).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1997 Cadillac Catera, please report it via our About page contact so we can verify and update this record.