2008 Cadillac DTS Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Cadillac DTS, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 DTS — Year-Specific Fitment Context
The 2008 Cadillac DTS is in year 3 of 6 using the 5x115 pattern (2006–2011). Wheels from any 2006–2011 Cadillac DTS are cross-compatible with the 2008 model.
Cadillac DTS Bolt Pattern by Year
The table below shows how the DTS's wheel specifications have changed over the years. The 2008 model year is highlighted.
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2008 Cadillac DTS
When selecting wheels for your 2008 Cadillac DTS, the 70.3mm center bore is critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The 50mm offset is sensitive; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the DTS uses M14x1.50 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts can lead to wheel loosening. For safety, prioritize wheels with the correct bore and offset, and always use hub rings when needed.
Historical Fitment Data Reference
In our dataset, Cadillac DTS appears from 2006 to 2011 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset below 45mm or above 55mm to prevent fender rubbing or brake clearance issues.
- ✅ If using aftermarket wheels, confirm hub-centric rings are included or purchase separately to match the 70.3mm bore.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Cadillac DTS — Frequently Asked Questions
What is the bolt pattern for a 2008 Cadillac DTS?
The 2008 Cadillac DTS uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 50mm.
What other years of Cadillac DTS have the same bolt pattern as the 2008?
The Cadillac DTS uses the 5x115 pattern from 2006 through 2011. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2008 Cadillac DTS?
Absolutely. Just ensure the aftermarket wheels have a 5x115 bolt pattern, an offset near 50mm, and a center bore of at least 70.3mm (using hub rings if larger).
What does 50mm offset mean for the 2008 DTS?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Cadillac.
What is the center bore of a 2008 Cadillac DTS?
The factory center bore (hub bore) for the 2008 Cadillac DTS is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Cadillac fit my 2008 DTS?
Only if they share the exact same 5x115 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset