2007 Cadillac DTS Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Cadillac DTS, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2007 DTS — Year-Specific Fitment Context
The 2007 Cadillac DTS is in year 2 of 6 using the 5x115 pattern (2006–2011). Wheels from any 2006–2011 Cadillac DTS are cross-compatible with the 2007 model.
Cadillac DTS Bolt Pattern by Year
The table below shows how the DTS's wheel specifications have changed over the years. The 2007 model year is highlighted.
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2007 Cadillac DTS
The 2007 Cadillac DTS uses a 5x115 bolt pattern with a 70.3mm center bore. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (conical/60-degree). Using incorrect lug nuts can lead to wheel loosening or damage. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully to maintain safety and performance.
Historical Fitment Data Reference
In our dataset, Cadillac DTS appears from 2006 to 2011 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 70.3mm bore is specific and mismatched bores cause vibrations.
- ✅ Check inner clearance for aftermarket wheels; the DTS has limited space near the strut and brake caliper.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Cadillac DTS — Frequently Asked Questions
What is the bolt pattern for a 2007 Cadillac DTS?
The 2007 Cadillac DTS uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 50mm.
What other years of Cadillac DTS have the same bolt pattern as the 2007?
The Cadillac DTS uses the 5x115 pattern from 2006 through 2011. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What is the PCD for a 2007 Cadillac DTS?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 DTS, the PCD is 5x115.
What is the factory wheel offset for a 2007 Cadillac DTS?
The OEM offset for the 2007 DTS is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 50mm offset mean for the 2007 DTS?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Cadillac.
Can I put aftermarket wheels on my 2007 Cadillac DTS?
Absolutely. Just ensure the aftermarket wheels have a 5x115 bolt pattern, an offset near 50mm, and a center bore of at least 70.3mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset