2007 Cadillac XLR Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Cadillac XLR, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 61 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 XLR — Year-Specific Fitment Context
The 2007 Cadillac XLR is in year 4 of 6 using the 5x120.65 pattern (2004–2009). Wheels from any 2004–2009 Cadillac XLR are cross-compatible with the 2007 model.
Cadillac XLR Bolt Pattern by Year
The table below shows how the XLR's wheel specifications have changed over the years. The 2007 model year is highlighted.
Fitment Notes
The 2007 Cadillac XLR has a bolt pattern of 5x120.65.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.75" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.75".
This means it is a 5 lug pattern with a circle diameter of 120.65mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Cadillac XLR appears from 2004 to 2009 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
2007 Cadillac XLR — Frequently Asked Questions
What is the bolt pattern for a 2007 Cadillac XLR?
The 2007 Cadillac XLR uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 61mm.
What other years of Cadillac XLR have the same bolt pattern as the 2007?
The Cadillac XLR uses the 5x120.65 pattern from 2004 through 2009. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Can I use spacers on my 2007 Cadillac XLR?
Yes, but ensure the wheel spacers match the 5x120.65 bolt pattern and 70.3mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Can I put aftermarket wheels on my 2007 Cadillac XLR?
Absolutely. Just ensure the aftermarket wheels have a 5x120.65 bolt pattern, an offset near 61mm, and a center bore of at least 70.3mm (using hub rings if larger).
What lug nut size does the 2007 Cadillac XLR use?
The 2007 Cadillac XLR uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 70.3mm center bore important for the 2007 XLR?
The 70.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Cadillac XLR is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2004-2009 (6 model years).
- Observed bolt-pattern variants: 1 (5x120.65).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2007 Cadillac XLR, please report it via our About page contact so we can verify and update this record.