2026 Cadillac XT4 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Cadillac XT4 is 5x115. It has a center bore of 70.3 mm, an offset range of 37-42, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 140 ft-lbs (190 Nm).
2026 Cadillac XT4 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Center Bore (Hub Bore) | 70.3 mm |
| Offset Range (ET) | 37-42 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 140 ft-lbs (190 Nm) |
2026 XT4 — Year-Specific Fitment Context
The 2026 model year is the final year of the Cadillac XT4's 5x115 bolt pattern run (since 2019). Wheels from any 2019–2026 Cadillac XT4 are cross-compatible with the 2026 model.
Cadillac XT4 Bolt Pattern by Year
Looking for all generations? View the complete Cadillac XT4 (2019–2026) Bolt Pattern & Generation Guide →
The table below shows how the XT4's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Cadillac XT4 Wheel Interchange & Donor Fitment Guide (5x115)
The 5x115 bolt pattern is shared by 473 vehicles in our database (moderately common). For safe wheel swaps on the 2026 Cadillac XT4, donor rims must match the 5x115 PCD and have a center bore of at least 70.3 mm:
DIRECT HUB MATCH Same 5x115 Pattern & Exact 70.3mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Chevrolet TrailBlazer | 70.2 mm (Exact) | 35-42 | 12x1.5 (Cone) |
| 2024 Chevrolet Trax | 70.2 mm (Exact) | 40-46 | 12x1.5 (Cone) |
| 2018 GMC Terrain | 70.3 mm (Exact) | 40 | 12x1.5 (Cone) |
| 1998 Oldsmobile Cutlass | 70.3 mm (Exact) | 42 | N 12x1.50 (Cone) |
| 2000 Pontiac Grand Am | 70.3 mm (Exact) | 42 | N 12x1.50 (Cone) |
| 2018 Buick Cascada | 70.2 mm (Exact) | 35-45mm | M12x1.5 (Cone) |
HUB RING FITMENT Same 5x115 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2005 Chrysler 300 | 71.6 mm | 71.6mm → 70.3mm |
24 |
| 2010 Dodge Charger | 71.5 mm | 71.5mm → 70.3mm |
22 |
| 2006 Cadillac STS | 71.6 mm | 71.6mm → 70.3mm |
42 |
| 2005 Dodge Magnum | 71.6 mm | 71.6mm → 70.3mm |
22 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Cadillac XT4 — Frequently Asked Questions
What is the bolt pattern for a 2026 Cadillac XT4?
The 2026 Cadillac XT4 uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 37-42mm.
What other years of Cadillac XT4 have the same bolt pattern as the 2026?
The Cadillac XT4 uses the 5x115 pattern from 2019 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2026 Cadillac?
The 2026 XT4 uses a 5x115 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2026 Cadillac XT4?
Yes, but ensure the wheel spacers match the 5x115 bolt pattern and 70.3mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the PCD for a 2026 Cadillac XT4?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 XT4, the PCD is 5x115.
Do 2026 Cadillac XT4s use lug bolts or lug nuts?
The 2026 XT4 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →