2020 Cadillac XT4 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Cadillac XT4, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2020 XT4 — Year-Specific Fitment Context
The 2020 Cadillac XT4 is in year 2 of 6 using the 5x115 pattern (2019–2024). Wheels from any 2019–2024 Cadillac XT4 are cross-compatible with the 2020 model.
Cadillac XT4 Bolt Pattern by Year
The table below shows how the XT4's wheel specifications have changed over the years. The 2020 model year is highlighted.
Fitment Notes
The 2020 Cadillac XT4 has a bolt pattern of 5x115.
This means it is a 5 lug pattern with a circle diameter of 115mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Cadillac XT4 appears from 2019 to 2024 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
2020 Cadillac XT4 — Frequently Asked Questions
What is the bolt pattern for a 2020 Cadillac XT4?
The 2020 Cadillac XT4 uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 40mm.
What other years of Cadillac XT4 have the same bolt pattern as the 2020?
The Cadillac XT4 uses the 5x115 pattern from 2019 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
What is the factory wheel offset for a 2020 Cadillac XT4?
The OEM offset for the 2020 XT4 is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 70.3mm center bore important for the 2020 XT4?
The 70.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 2020 Cadillac XT4?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 XT4, the PCD is 5x115.
How tight should I torque the lug nuts on a 2020 Cadillac XT4?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Cadillac XT4 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2019-2024 (6 model years).
- Observed bolt-pattern variants: 1 (5x115).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2020 Cadillac XT4, please report it via our About page contact so we can verify and update this record.