1995 Chevrolet 1500 Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Chevrolet 1500 Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 24-28 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
1995 1500 Regular Cab — Year-Specific Fitment Context
The 1995 Chevrolet 1500 Regular Cab is in year 4 of 7 using the 6x139.7 pattern (1992–1998). Wheels from any 1992–1998 Chevrolet 1500 Regular Cab are cross-compatible with the 1995 model.
Chevrolet 1500 Regular Cab Bolt Pattern by Year
The table below shows how the 1500 Regular Cab's wheel specifications have changed over the years. The 1995 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 1995 Chevrolet 1500 Regular Cab
For your 1995 Chevrolet 1500 Regular Cab, the 6x139.7 bolt pattern is shared across 1992–1998 models, ensuring cross-compatibility. The critical center bore is 78.1mm; aftermarket wheels with larger bores require hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 24-28mm to avoid rubbing or suspension interference. Always use 14x1.5 lug nuts with the correct seat type—factory wheels use cone seats; aftermarket may require ball or acorn seats. Mismatched seating can cause wheel loosening. Verify thread engagement and torque to spec. Safety first: improper fitment compromises handling and braking.
Historical Fitment Data Reference
In our dataset, Chevrolet 1500 Regular Cab appears from 1992 to 1998 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 52.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stud failure.
- ✅ Check for caliper clearance with aftermarket wheels, especially if offset is at the lower end (24mm).
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 Chevrolet 1500 Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 1995 Chevrolet 1500 Regular Cab?
The 1995 Chevrolet 1500 Regular Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 24-28mm.
What other years of Chevrolet 1500 Regular Cab have the same bolt pattern as the 1995?
The Chevrolet 1500 Regular Cab uses the 6x139.7 pattern from 1992 through 1998. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
What lug nut size does the 1995 Chevrolet 1500 Regular Cab use?
The 1995 Chevrolet 1500 Regular Cab uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 1995 Chevrolet?
The 1995 1500 Regular Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 1995 Chevrolet 1500 Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 1995 Chevrolet 1500 Regular Cab?
The factory center bore (hub bore) for the 1995 Chevrolet 1500 Regular Cab is 78.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset