2010 Chevrolet Colorado Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Chevrolet Colorado Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.3 mm |
| Offset (ET) | 33 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2010 Colorado Crew Cab — Year-Specific Fitment Context
The 2010 Chevrolet Colorado Crew Cab is in year 7 of 21 using the 6x139.7 pattern (2004–2024). Wheels from any 2004–2024 Chevrolet Colorado Crew Cab are cross-compatible with the 2010 model. Across its full production run (2004–2024), the Colorado Crew Cab has also used: 6x120.
Chevrolet Colorado Crew Cab Bolt Pattern by Year
The table below shows how the Colorado Crew Cab's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 100.3 | 33 |
| 2005 | 6x139.7 | 100.3 | 33 |
| 2006 | 6x139.7 | 100.3 | 33 |
| 2007 | 6x139.7 | 100.3 | 33 |
| 2008 | 6x139.7 | 100.3 | 33 |
| 2009 | 6x139.7 | 100.3 | 33 |
| ▸ 2010 | 6x139.7 | 100.3 | 33 |
| 2011 | 6x139.7 | 100.3 | 33 |
| 2012 | 6x139.7 | 100.3 | 33 |
| 2015 | 6x120 | 66.9 | 33 |
| 2016 | 6x120 | 66.9 | 33 |
| 2017 | 6x120 | 66.9 | 33 |
| 2018 | 6x120 | 66.9 | 33 |
| 2019 | 6x120 | 66.9 | 33 |
| 2020 | 6x120 | 66.9 | 33 |
| 2021 | 6x120 | 66.9 | 33 |
| 2022 | 6x120 | 66.9 | 33 |
| 2023 | 6x139.7 | 78.1 | 30 |
| 2024 | 6x139.7 | 78.1 | 30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2010 Chevrolet Colorado Crew Cab
For your 2010 Chevrolet Colorado Crew Cab, the 6x139.7 bolt pattern is shared with 2004–2024 models, but critical dimensions vary. The center bore is 100.3mm; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: the factory 33mm offset maintains suspension geometry and tire clearance. Using incorrect offset can cause rubbing or bearing wear. Always use lug nuts with the correct 12x1.5 thread pitch and matching seat type (conical/ball) to avoid wheel loosening. Verify wheel load rating meets or exceeds OEM specifications.
Historical Fitment Data Reference
In our dataset, Chevrolet Colorado Crew Cab appears from 2004 to 2024 (19 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 3.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check for brake caliper clearance when using aftermarket wheels, especially with larger offset or spoke design.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Chevrolet Colorado Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2010 Chevrolet Colorado Crew Cab?
The 2010 Chevrolet Colorado Crew Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.3mm and the offset is 33mm.
What other years of Chevrolet Colorado Crew Cab have the same bolt pattern as the 2010?
The Chevrolet Colorado Crew Cab uses the 6x139.7 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the center bore of a 2010 Chevrolet Colorado Crew Cab?
The factory center bore (hub bore) for the 2010 Chevrolet Colorado Crew Cab is 100.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2010 Chevrolet Colorado Crew Cab?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 100.3mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Can I put aftermarket wheels on my 2010 Chevrolet Colorado Crew Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 33mm, and a center bore of at least 100.3mm (using hub rings if larger).
What is the factory wheel offset for a 2010 Chevrolet Colorado Crew Cab?
The OEM offset for the 2010 Colorado Crew Cab is typically around 33mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset