2019 Chevrolet Silverado 1500 Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Chevrolet Silverado 1500 Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 24-28 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2019 Silverado 1500 Crew Cab — Year-Specific Fitment Context
The 2019 Chevrolet Silverado 1500 Crew Cab is in year 16 of 21 using the 6x139.7 pattern (2004–2024). Wheels from any 2004–2024 Chevrolet Silverado 1500 Crew Cab are cross-compatible with the 2019 model.
Chevrolet Silverado 1500 Crew Cab Bolt Pattern by Year
The table below shows how the Silverado 1500 Crew Cab's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 78.1 | 16 |
| 2005 | 6x139.7 | 78.1 | 16 |
| 2006 | 6x139.7 | 78.1 | 16 |
| 2007 | 6x139.7 | 78.1 | 16 |
| 2008 | 6x139.7 | 78.1 | 16 |
| 2009 | 6x139.7 | 78.1 | 26 |
| 2010 | 6x139.7 | 78.1 | 26 |
| 2011 | 6x139.7 | 78.1 | 26 |
| 2012 | 6x139.7 | 78.1 | 26 |
| 2013 | 6x139.7 | 78.1 | 26 |
| 2014 | 6x139.7 | 78.1 | 26 |
| 2015 | 6x139.7 | 78.1 | 26 |
| 2016 | 6x139.7 | 78.1 | 26 |
| 2017 | 6x139.7 | 78.1 | 26 |
| 2018 | 6x139.7 | 78.1 | 26 |
| ▸ 2019 | 6x139.7 | 78.1 | 24-28 |
| 2020 | 6x139.7 | 78.1 | 24-28 |
| 2021 | 6x139.7 | 78.1 | 24-28 |
| 2022 | 6x139.7 | 78.1 | 24-28 |
| 2023 | 6x139.7 | 78.1 | 24-28 |
| 2024 | 6x139.7 | 78.1 | 24-28 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2019 Chevrolet Silverado 1500 Crew Cab
For your 2019 Chevrolet Silverado 1500 Crew Cab, the 6x139.7 bolt pattern and 78.1mm center bore are critical. Aftermarket wheels must have a center bore of at least 78.1mm; use hub-centric rings to ensure proper load distribution and prevent vibrations. Offset should stay within 24-28mm to maintain suspension geometry and avoid rubbing. Always use 14x1.5 lug nuts with the correct seat type—factory wheels use a cone seat, while aftermarket may require ball or conical seats. Mismatched lug nuts can cause wheel loosening. Verify thread pitch and seat compatibility before installation.
Historical Fitment Data Reference
In our dataset, Chevrolet Silverado 1500 Crew Cab appears from 2004 to 2024 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 54.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Check for caliper clearance when using wheels with offset near 24mm, as some aftermarket designs may contact the brake caliper.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 78.1mm bore is specific and rings prevent vibration and stress on studs.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Chevrolet Silverado 1500 Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2019 Chevrolet Silverado 1500 Crew Cab?
The 2019 Chevrolet Silverado 1500 Crew Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 24-28mm.
What other years of Chevrolet Silverado 1500 Crew Cab have the same bolt pattern as the 2019?
The Chevrolet Silverado 1500 Crew Cab uses the 6x139.7 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2019 Chevrolet Silverado 1500 Crew Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 24-28mm, and a center bore of at least 78.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2019 Chevrolet Silverado 1500 Crew Cab?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2019 Chevrolet Silverado 1500 Crew Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 Silverado 1500 Crew Cab, the PCD is 6x139.7.
How do I measure the bolt pattern on my 2019 Chevrolet?
The 2019 Silverado 1500 Crew Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset