2006 Chevrolet Silverado 3500 Extended Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Chevrolet Silverado 3500 Extended Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 116.6 mm |
| Offset (ET) | 12 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2006 Silverado 3500 Extended Cab — Year-Specific Fitment Context
The 2006 model year is the final year of the Chevrolet Silverado 3500 Extended Cab's 8x165.1 bolt pattern run (since 2001). Wheels from any 2001–2006 Chevrolet Silverado 3500 Extended Cab are cross-compatible with the 2006 model.
Chevrolet Silverado 3500 Extended Cab Bolt Pattern by Year
The table below shows how the Silverado 3500 Extended Cab's wheel specifications have changed over the years. The 2006 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2006 Chevrolet Silverado 3500 Extended Cab
For your 2006 Chevrolet Silverado 3500 Extended Cab, the bolt pattern is 8x165.1mm with a center bore of 116.6mm. Aftermarket wheels often have a larger bore, so hub-centric rings are essential to prevent vibration and ensure proper load distribution. The offset range is tight; stick to 12mm ±5mm to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—factory wheels use a conical (60-degree) seat. Never mix seat types, as this can cause wheel loosening. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Chevrolet Silverado 3500 Extended Cab appears from 2001 to 2006 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with a center bore larger than 116.6mm without hub-centric rings.
- ✅ Check for caliper clearance when using aftermarket wheels; some designs may require spacers.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Chevrolet Silverado 3500 Extended Cab — Frequently Asked Questions
What is the bolt pattern for a 2006 Chevrolet Silverado 3500 Extended Cab?
The 2006 Chevrolet Silverado 3500 Extended Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.6mm and the offset is 12mm.
What other years of Chevrolet Silverado 3500 Extended Cab have the same bolt pattern as the 2006?
The Chevrolet Silverado 3500 Extended Cab uses the 8x165.1 pattern from 2001 through 2006. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Will wheels from another Chevrolet fit my 2006 Silverado 3500 Extended Cab?
Only if they share the exact same 8x165.1 bolt pattern, a compatible offset, and a center bore equal to or larger than 116.6mm.
How tight should I torque the lug nuts on a 2006 Chevrolet Silverado 3500 Extended Cab?
Refer to your owner's manual for exact specs, but always tighten the N 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2006 Chevrolet Silverado 3500 Extended Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2006 Silverado 3500 Extended Cab, the PCD is 8x165.1.
Do 2006 Chevrolet Silverado 3500 Extended Cabs use lug bolts or lug nuts?
The 2006 Silverado 3500 Extended Cab requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset