2006 Chevrolet SSR Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Chevrolet SSR, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x127 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 86.0 mm |
| Offset (ET) | 27 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2006 SSR — Year-Specific Fitment Context
The 2006 model year is the final year of the Chevrolet SSR's 6x127 bolt pattern run (since 2003). Wheels from any 2003–2006 Chevrolet SSR are cross-compatible with the 2006 model.
Chevrolet SSR Bolt Pattern by Year
The table below shows how the SSR's wheel specifications have changed over the years. The 2006 model year is highlighted.
6x127 Pattern Context
This bolt pattern appears on 49 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x127:
Expert Buying Guide for 2006 Chevrolet SSR
For the 2006 Chevrolet SSR, the 6x127 bolt pattern and 86.0mm center bore are critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibration and ensure load support. The factory offset is 27mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—factory uses cone seats. Using incorrect lug nuts can lead to wheel detachment. Prioritize wheels with proper load rating for this 4700-lb vehicle.
Historical Fitment Data Reference
In our dataset, Chevrolet SSR appears from 2003 to 2006 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid wheels with offset below 22mm or above 32mm to prevent fender or suspension contact.
- ✅ Check that aftermarket wheels have a center bore ≥86.0mm; use hub-centric rings if larger.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Chevrolet SSR — Frequently Asked Questions
What is the bolt pattern for a 2006 Chevrolet SSR?
The 2006 Chevrolet SSR uses a 6x127 bolt pattern (also called lug pattern or PCD). The center bore is 86.0mm and the offset is 27mm.
What other years of Chevrolet SSR have the same bolt pattern as the 2006?
The Chevrolet SSR uses the 6x127 pattern from 2003 through 2006. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
What is the factory wheel offset for a 2006 Chevrolet SSR?
The OEM offset for the 2006 SSR is typically around 27mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2006 Chevrolet SSR?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2006 SSR, the PCD is 6x127.
Why is matching the 86.0mm center bore important for the 2006 SSR?
The 86.0mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2006 Chevrolet SSR use?
The 2006 Chevrolet SSR uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset