2001 Chevrolet Tracker Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Chevrolet Tracker, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.25 |
| Center Bore (CB) | 108.4 mm |
| Offset (ET) | 20-30mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2001 Tracker — Year-Specific Fitment Context
The 2001 Chevrolet Tracker is in year 4 of 7 using the 5x139.7 pattern (1998–2004). Wheels from any 1998–2004 Chevrolet Tracker are cross-compatible with the 2001 model.
Chevrolet Tracker Bolt Pattern by Year
The table below shows how the Tracker's wheel specifications have changed over the years. The 2001 model year is highlighted.
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Expert Buying Guide for 2001 Chevrolet Tracker
The 2001 Chevrolet Tracker uses a 5x139.7 bolt pattern with a critical center bore of 108.4mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stick to 20-30mm to avoid rubbing or clearance issues. Always use M12x1.25 lug nuts with the correct seat type (cone or ball) to match the wheel; mismatched seats can cause loosening or damage. Verify that aftermarket wheels are hub-centric or use rings, and check that lug nuts fully engage threads (at least 6-8 turns).
Historical Fitment Data Reference
In our dataset, Chevrolet Tracker appears from 1998 to 2004 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 50.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid wheels with offset outside 20-30mm; lower offset may rub suspension, higher offset may contact brake calipers.
- ✅ Use a thin coat of anti-seize on lug nut threads to prevent galling, but keep it off the seating surface.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Chevrolet Tracker — Frequently Asked Questions
What is the bolt pattern for a 2001 Chevrolet Tracker?
The 2001 Chevrolet Tracker uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 108.4mm and the offset is 20-30mmmm.
What other years of Chevrolet Tracker have the same bolt pattern as the 2001?
The Chevrolet Tracker uses the 5x139.7 pattern from 1998 through 2004. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2001 Chevrolet?
The 2001 Tracker uses a 5x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2001 Chevrolet Tracker?
Refer to your owner's manual for exact specs, but always tighten the M12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2001 Chevrolet Tracker?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2001 Tracker, the PCD is 5x139.7.
Will wheels from another Chevrolet fit my 2001 Tracker?
Only if they share the exact same 5x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 108.4mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset