2022 Chevrolet Trax Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2022 Chevrolet Trax is 5x105. It has a center bore of 56.6 mm, an offset range of 40, and utilizes 12x1.5 (Cone seat, 19mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2022 Chevrolet Trax Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x105 |
|---|---|
| Center Bore (Hub Bore) | 56.6 mm |
| Offset Range (ET) | 40 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
2022 Trax — Year-Specific Fitment Context
The 2022 Chevrolet Trax is in year 8 of 9 using the 5x105 pattern (2015–2023). Wheels from any 2015–2023 Chevrolet Trax are cross-compatible with the 2022 model. Across its full production run (2015–2025), the Trax has also used: 5x115.
Chevrolet Trax Bolt Pattern by Year
The table below shows how the Trax's wheel specifications have changed over the years. The 2022 model year is highlighted.
2022 Chevrolet Trax Wheel Interchange & Donor Fitment Guide (5x105)
The 5x105 bolt pattern is shared by 50 vehicles in our database (uncommon). For safe wheel swaps on the 2022 Chevrolet Trax, donor rims must match the 5x105 PCD and have a center bore of at least 56.6 mm:
DIRECT HUB MATCH Same 5x105 Pattern & Exact 56.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2023 Chevrolet Bolt EV | 56.6 mm (Exact) | 40 | 12x1.5 (Cone) |
| 2011 Chevrolet Cruze | 56.6 mm (Exact) | 39 | N 12x1.50 (Cone) |
| 2016 Chevrolet Cruze Limited | 56.6 mm (Exact) | 40 | 12x1.5 (Cone) |
| 2024 Chevrolet Onix | 56.6 mm (Exact) | 39-44 | 12x1.5 (Ball) |
| 2012 Chevrolet Sonic | 56.6 mm (Exact) | 40 | N 12x1.50 (Cone) |
| 2019 Chevrolet Volt | 56.6 mm (Exact) | 38-42mm | M12x1.5 (Cone) |
Expert Buying Guide for 2022 Chevrolet Trax
When selecting aftermarket wheels for your 2022 Chevrolet Trax, the 56.6mm center bore is critical. Most aftermarket wheels have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 40mm; staying within ±5mm is recommended to avoid rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a cone seat, while aftermarket may require ball or conical seats. Mismatched lug nuts can cause wheel loosening or damage. For safety, verify that the wheel's load rating meets or exceeds the Trax's requirements.
Historical Fitment Data Reference
In our dataset, Chevrolet Trax appears from 2015 to 2025 (11 model years). Across model years, this model appears with 2 bolt patterns (5x105, 5x115).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 86.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on wheel studs.
- ✅ Check brake caliper clearance with aftermarket wheels, especially if offset is lower than 35mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
2022 Chevrolet Trax — Frequently Asked Questions
What is the bolt pattern for a 2022 Chevrolet Trax?
The 2022 Chevrolet Trax uses a 5x105 bolt pattern (also called lug pattern or PCD). The center bore is 56.6mm and the offset is 40mm.
What other years of Chevrolet Trax have the same bolt pattern as the 2022?
The Chevrolet Trax uses the 5x105 pattern from 2015 through 2023. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.
Will wheels from another Chevrolet fit my 2022 Trax?
Only if they share the exact same 5x105 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.6mm.
What does 40mm offset mean for the 2022 Trax?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chevrolet.
What is the center bore of a 2022 Chevrolet Trax?
The factory center bore (hub bore) for the 2022 Chevrolet Trax is 56.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2022 Chevrolet Trax?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2022 Trax, the PCD is 5x105.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →