2025 Chevrolet Trax Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Chevrolet Trax is 5x115. It has a center bore of 70.2 mm, an offset range of 40-46, and utilizes 12x1.5 (Ball seat, 19mm hex) fasteners tightened to 100 ft-lbs (140 Nm).
2025 Chevrolet Trax Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Center Bore (Hub Bore) | 70.2 mm |
| Offset Range (ET) | 40-46 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 100 ft-lbs (140 Nm) |
2025 Trax — Year-Specific Fitment Context
The 2025 Chevrolet Trax is in year 2 of 3 using the 5x115 pattern (2024–2026). Wheels from any 2024–2026 Chevrolet Trax are cross-compatible with the 2025 model. Across its full production run (2015–2026), the Trax has also used: 5x105.
Chevrolet Trax Bolt Pattern by Year
Looking for all generations? View the complete Chevrolet Trax (2015–2026) Bolt Pattern & Generation Guide →
The table below shows how the Trax's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Chevrolet Trax Wheel Interchange & Donor Fitment Guide (5x115)
The 5x115 bolt pattern is shared by 473 vehicles in our database (moderately common). For safe wheel swaps on the 2025 Chevrolet Trax, donor rims must match the 5x115 PCD and have a center bore of at least 70.2 mm:
DIRECT HUB MATCH Same 5x115 Pattern & Exact 70.2mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2018 GMC Terrain | 70.3 mm (Exact) | 40 | 12x1.5 (Cone) |
| 1998 Oldsmobile Cutlass | 70.3 mm (Exact) | 42 | N 12x1.50 (Cone) |
| 2000 Pontiac Grand Am | 70.3 mm (Exact) | 42 | N 12x1.50 (Cone) |
| 2018 Buick Cascada | 70.2 mm (Exact) | 35-45mm | M12x1.5 (Cone) |
| 2025 Buick Encore GX | 70.3 mm (Exact) | 38-42 | 12x1.5 (Ball) |
| 2025 Buick Envision | 70.2 mm (Exact) | 38-42 | 12x1.5 (Cone) |
HUB RING FITMENT Same 5x115 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2023 Chrysler 300 | 71.5 mm | 71.5mm → 70.2mm |
24 |
| 2010 Dodge Charger | 71.5 mm | 71.5mm → 70.2mm |
22 |
| 2006 Cadillac STS | 71.6 mm | 71.6mm → 70.2mm |
42 |
| 2005 Dodge Magnum | 71.6 mm | 71.6mm → 70.2mm |
22 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Chevrolet Trax — Frequently Asked Questions
What is the bolt pattern for a 2025 Chevrolet Trax?
The 2025 Chevrolet Trax uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.2mm and the offset is 40-46mm.
What other years of Chevrolet Trax have the same bolt pattern as the 2025?
The Chevrolet Trax uses the 5x115 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2025 Chevrolet Trax?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 70.2mm center bore important for the 2025 Trax?
The 70.2mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2025 Chevrolet Trax?
The OEM offset for the 2025 Trax is typically around 40-46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2025 Chevrolet Trax?
The factory center bore (hub bore) for the 2025 Chevrolet Trax is 70.2mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →