1993 Dodge Colt Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Dodge Colt, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1993 Colt — Year-Specific Fitment Context
The 1993 Dodge Colt is in year 2 of 3 using the 4x114.3 pattern (1992–1994). Wheels from any 1992–1994 Dodge Colt are cross-compatible with the 1993 model.
Dodge Colt Bolt Pattern by Year
The table below shows how the Colt's wheel specifications have changed over the years. The 1993 model year is highlighted.
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 1993 Dodge Colt
For your 1993 Dodge Colt (4x114.3 bolt pattern), the center bore is 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings are essential to prevent vibration and ensure proper load distribution. The offset range is 35-45mm; staying within this range avoids rubbing on suspension or fenders. Always use M12x1.5 lug nuts with the correct seat type (cone or ball seat) matching your wheels. Incorrect thread pitch or seat can cause wheel loosening. Re-torque after 50-100 miles. Wheels from 1992-1994 Colt models are direct fit.
Historical Fitment Data Reference
In our dataset, Dodge Colt appears from 1992 to 1994 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub bore and use hub-centric rings if needed.
- ✅ Check offset carefully; 35-45mm is safe, but lower offset may require fender rolling.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 Dodge Colt — Frequently Asked Questions
What is the bolt pattern for a 1993 Dodge Colt?
The 1993 Dodge Colt uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mmmm.
What other years of Dodge Colt have the same bolt pattern as the 1993?
The Dodge Colt uses the 4x114.3 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1993 Dodge Colt?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 1993 Dodge Colt use?
The 1993 Dodge Colt uses M12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Dodge fit my 1993 Colt?
Only if they share the exact same 4x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What does 35-45mmmm offset mean for the 1993 Colt?
An offset of 35-45mmmm means the wheel's mounting surface is 35-45mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Dodge.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset