1997 Dodge Dakota Club Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Dodge Dakota Club Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | 1/2 20 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1997 Dakota Club Cab — Year-Specific Fitment Context
The 1997 Dodge Dakota Club Cab is in year 6 of 13 using the 6x114.3 pattern (1992–2004). Wheels from any 1992–2004 Dodge Dakota Club Cab are cross-compatible with the 1997 model. Across its full production run (1992–2007), the Dakota Club Cab has also used: 5x139.7.
Dodge Dakota Club Cab Bolt Pattern by Year
The table below shows how the Dakota Club Cab's wheel specifications have changed over the years. The 1997 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x114.3 | 71.5 | 30 |
| 1993 | 6x114.3 | 71.5 | 30 |
| 1994 | 6x114.3 | 71.5 | 30 |
| 1995 | 6x114.3 | 71.5 | 30 |
| 1996 | 6x114.3 | 71.5 | 30 |
| ▸ 1997 | 6x114.3 | 71.5 | 30 |
| 1998 | 6x114.3 | 71.5 | 30 |
| 1999 | 6x114.3 | 71.5 | 30 |
| 2000 | 6x114.3 | 71.5 | 30 |
| 2001 | 6x114.3 | 71.5 | 30 |
| 2002 | 6x114.3 | 71.5 | 30 |
| 2003 | 6x114.3 | 71.5 | 30 |
| 2004 | 6x114.3 | 71.5 | 30 |
| 2005 | 5x139.7 | 77.8 | 25.4 |
| 2006 | 5x139.7 | 77.8 | 25.4 |
| 2007 | 5x139.7 | 77.8 | 25.4 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 1997 Dodge Dakota Club Cab
For your 1997 Dodge Dakota Club Cab, the 6x114.3 bolt pattern is shared with 1992–2004 models, ensuring cross-compatibility. The 71.5mm center bore is critical: aftermarket wheels with larger bores require hub-centric rings to prevent vibration and stress on lug studs. Offset is sensitive; the factory 30mm offset maintains proper suspension geometry and tire clearance. Using wheels with significantly different offset can cause rubbing or bearing wear. Safety warning: Always use lug nuts with the correct thread pitch (1/2-20) and seat type (conical/60-degree). Improper seating can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Dodge Dakota Club Cab appears from 1992 to 2007 (16 model years). Across model years, this model appears with 2 bolt patterns (5x139.7, 6x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 4.6 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset below 20mm or above 40mm to prevent fender rubbing or brake caliper contact.
- ✅ If using aftermarket wheels, always install hub-centric rings (71.5mm to wheel bore) to eliminate vibration.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Dodge Dakota Club Cab — Frequently Asked Questions
What is the bolt pattern for a 1997 Dodge Dakota Club Cab?
The 1997 Dodge Dakota Club Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 30mm.
What other years of Dodge Dakota Club Cab have the same bolt pattern as the 1997?
The Dodge Dakota Club Cab uses the 6x114.3 pattern from 1992 through 2004. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
What is the center bore of a 1997 Dodge Dakota Club Cab?
The factory center bore (hub bore) for the 1997 Dodge Dakota Club Cab is 71.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 1997 Dodge Dakota Club Cab?
Refer to your owner's manual for exact specs, but always tighten the 1/2 20 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 1997 Dodge Dakota Club Cab?
Yes, but ensure the wheel spacers match the 6x114.3 bolt pattern and 71.5mm center bore. Also verify that you have enough thread engagement for your 1/2 20 hardware.
What lug nut size does the 1997 Dodge Dakota Club Cab use?
The 1997 Dodge Dakota Club Cab uses 1/2 20 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset