2007 Dodge Dakota Club Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Dodge Dakota Club Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 25.4 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2007 Dakota Club Cab — Year-Specific Fitment Context
The 2007 model year is the final year of the Dodge Dakota Club Cab's 5x139.7 bolt pattern run (since 2005). Wheels from any 2005–2007 Dodge Dakota Club Cab are cross-compatible with the 2007 model. Across its full production run (1992–2007), the Dakota Club Cab has also used: 6x114.3.
Dodge Dakota Club Cab Bolt Pattern by Year
The table below shows how the Dakota Club Cab's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x114.3 | 71.5 | 30 |
| 1993 | 6x114.3 | 71.5 | 30 |
| 1994 | 6x114.3 | 71.5 | 30 |
| 1995 | 6x114.3 | 71.5 | 30 |
| 1996 | 6x114.3 | 71.5 | 30 |
| 1997 | 6x114.3 | 71.5 | 30 |
| 1998 | 6x114.3 | 71.5 | 30 |
| 1999 | 6x114.3 | 71.5 | 30 |
| 2000 | 6x114.3 | 71.5 | 30 |
| 2001 | 6x114.3 | 71.5 | 30 |
| 2002 | 6x114.3 | 71.5 | 30 |
| 2003 | 6x114.3 | 71.5 | 30 |
| 2004 | 6x114.3 | 71.5 | 30 |
| 2005 | 5x139.7 | 77.8 | 25.4 |
| 2006 | 5x139.7 | 77.8 | 25.4 |
| ▸ 2007 | 5x139.7 | 77.8 | 25.4 |
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Expert Buying Guide for 2007 Dodge Dakota Club Cab
For your 2007 Dodge Dakota Club Cab, the 5x139.7 bolt pattern is shared with 2005-2007 models. The center bore is 77.8mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is critical: the factory offset is 25.4mm, but a range of 0-30mm is acceptable depending on tire width. Always use the correct lug nuts: 9/16" thread with a conical (60-degree) seat. Using incorrect seat type (e.g., ball seat) can cause wheel loosening. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Dodge Dakota Club Cab appears from 1992 to 2007 (16 model years). Across model years, this model appears with 2 bolt patterns (5x139.7, 6x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 4.6 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 95-105 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels with a center bore larger than 77.8mm without hub-centric rings.
- ✅ Check that aftermarket wheels have a conical seat; flat or ball seat lug nuts are not compatible.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Dodge Dakota Club Cab — Frequently Asked Questions
What is the bolt pattern for a 2007 Dodge Dakota Club Cab?
The 2007 Dodge Dakota Club Cab uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 25.4mm.
What other years of Dodge Dakota Club Cab have the same bolt pattern as the 2007?
The Dodge Dakota Club Cab uses the 5x139.7 pattern from 2005 through 2007. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Will wheels from another Dodge fit my 2007 Dakota Club Cab?
Only if they share the exact same 5x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 77.8mm.
How do I measure the bolt pattern on my 2007 Dodge?
The 2007 Dakota Club Cab uses a 5x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2007 Dodge Dakota Club Cabs use lug bolts or lug nuts?
The 2007 Dakota Club Cab requires 9/16 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 77.8mm center bore important for the 2007 Dakota Club Cab?
The 77.8mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset