2001 Dodge Dakota Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Dodge Dakota Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | 1/2 20 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2001 Dakota Regular Cab — Year-Specific Fitment Context
The 2001 Dodge Dakota Regular Cab is in year 10 of 13 using the 6x114.3 pattern (1992–2004). Wheels from any 1992–2004 Dodge Dakota Regular Cab are cross-compatible with the 2001 model.
Dodge Dakota Regular Cab Bolt Pattern by Year
The table below shows how the Dakota Regular Cab's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x114.3 | 71.5 | 30 |
| 1993 | 6x114.3 | 71.5 | 30 |
| 1994 | 6x114.3 | 71.5 | 30 |
| 1995 | 6x114.3 | 71.5 | 30 |
| 1996 | 6x114.3 | 71.5 | 30 |
| 1997 | 6x114.3 | 71.5 | 30 |
| 1998 | 6x114.3 | 71.5 | 30 |
| 1999 | 6x114.3 | 71.5 | 30 |
| 2000 | 6x114.3 | 71.5 | 30 |
| ▸ 2001 | 6x114.3 | 71.5 | 30 |
| 2002 | 6x114.3 | 71.5 | 30 |
| 2003 | 6x114.3 | 71.5 | 30 |
| 2004 | 6x114.3 | 71.5 | 30 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2001 Dodge Dakota Regular Cab
For your 2001 Dodge Dakota Regular Cab, the bolt pattern is 6x114.3mm with a center bore of 71.5mm. When selecting aftermarket wheels, ensure hub-centric rings are used to match the bore precisely, preventing vibration and load stress. The factory offset is 30mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (1/2-20) and seat type—factory wheels use a conical (60-degree) seat. Using incorrect lug nuts can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and check offset compatibility to maintain safe handling.
Historical Fitment Data Reference
In our dataset, Dodge Dakota Regular Cab appears from 1992 to 2004 (13 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 95-105 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Avoid wheels with a center bore larger than 71.5mm without hub rings; vibration and stress on studs may occur.
- ✅ For lifted or lowered trucks, offset adjustments may be needed; test fit before finalizing purchase.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Dodge Dakota Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2001 Dodge Dakota Regular Cab?
The 2001 Dodge Dakota Regular Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 30mm.
What other years of Dodge Dakota Regular Cab have the same bolt pattern as the 2001?
The Dodge Dakota Regular Cab uses the 6x114.3 pattern from 1992 through 2004. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2001 Dodge Dakota Regular Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x114.3 bolt pattern, an offset near 30mm, and a center bore of at least 71.5mm (using hub rings if larger).
What is the center bore of a 2001 Dodge Dakota Regular Cab?
The factory center bore (hub bore) for the 2001 Dodge Dakota Regular Cab is 71.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2001 Dodge Dakota Regular Cabs use lug bolts or lug nuts?
The 2001 Dakota Regular Cab requires 1/2 20 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2001 Dodge Dakota Regular Cab use?
The 2001 Dodge Dakota Regular Cab uses 1/2 20 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset