2011 Dodge Journey Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Dodge Journey, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Lug Nut / Bolt Size | N 1/2" (20 UNF) |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 42 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2011 Journey — Year-Specific Fitment Context
The 2011 Dodge Journey is in year 3 of 12 using the 5x127 pattern (2009–2020). Wheels from any 2009–2020 Dodge Journey are cross-compatible with the 2011 model.
Dodge Journey Bolt Pattern by Year
The table below shows how the Journey's wheel specifications have changed over the years. The 2011 model year is highlighted.
Fitment Notes
The 2011 Dodge Journey has a bolt pattern of 5x127.
Imperial Conversion: This bolt pattern is commonly referred to as 5x5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x5".
This means it is a 5 lug pattern with a circle diameter of 127mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Dodge Journey appears from 2009 to 2020 (12 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 2.0 mm
5x127 Pattern Context
This bolt pattern appears on 236 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x127:
2011 Dodge Journey — Frequently Asked Questions
What is the bolt pattern for a 2011 Dodge Journey?
The 2011 Dodge Journey uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 42mm.
What other years of Dodge Journey have the same bolt pattern as the 2011?
The Dodge Journey uses the 5x127 pattern from 2009 through 2020. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the center bore of a 2011 Dodge Journey?
The factory center bore (hub bore) for the 2011 Dodge Journey is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2011 Dodge?
The 2011 Journey uses a 5x127 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 42mm offset mean for the 2011 Journey?
An offset of 42mm means the wheel's mounting surface is 42mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Dodge.
Do 2011 Dodge Journeys use lug bolts or lug nuts?
The 2011 Journey requires N 1/2" (20 UNF) hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Dodge Journey is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2009-2020 (12 model years).
- Observed bolt-pattern variants: 1 (5x127).
- Observed total offset span across years: 2.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2011 Dodge Journey, please report it via our About page contact so we can verify and update this record.