2019 Dodge Journey Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Dodge Journey, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x127 is commonly referred to as 5x5" in US Standard.
2019 Journey — Year-Specific Fitment Context
The 2019 Dodge Journey is in year 11 of 12 using the 5x127 pattern (2009–2020). Wheels from any 2009–2020 Dodge Journey are cross-compatible with the 2019 model.
Dodge Journey Bolt Pattern by Year
The table below shows how the Journey's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x127 Pattern Context
This bolt pattern appears on 236 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x127:
Expert Buying Guide for 2019 Dodge Journey
The 2019 Dodge Journey uses a 5x127 bolt pattern with a 71.5mm center bore. Aftermarket wheels must have a bore ≥71.5mm; use hub-centric rings to prevent vibration and ensure proper load distribution. Offset is critical: stock is 40mm. Deviating more than ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: 12x1.5 thread pitch with conical (60-degree) or ball seat. Never use incorrect seat type—this can cause wheel loosening. For safety, re-torque after 50-100 miles. Cross-compatible with 2009-2020 Journey models.
Historical Fitment Data Reference
In our dataset, Dodge Journey appears from 2009 to 2020 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 2.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lb after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 35mm or above 45mm to prevent fender rubbing or brake clearance issues.
- ✅ When using aftermarket wheels, always install hub-centric rings (71.5mm to wheel bore) to eliminate vibrations.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Dodge Journey — Frequently Asked Questions
What is the bolt pattern for a 2019 Dodge Journey?
The 2019 Dodge Journey uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 40mm.
What other years of Dodge Journey have the same bolt pattern as the 2019?
The Dodge Journey uses the 5x127 pattern from 2009 through 2020. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What lug nut size does the 2019 Dodge Journey use?
The 2019 Dodge Journey uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2019 Dodge Journeys use lug bolts or lug nuts?
The 2019 Journey requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Dodge fit my 2019 Journey?
Only if they share the exact same 5x127 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.5mm.
Can I use spacers on my 2019 Dodge Journey?
Yes, but ensure the wheel spacers match the 5x127 bolt pattern and 71.5mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset