2025 Jeep Recon Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Jeep Recon is 5x127 (5x5"). It has a center bore of 71.5 mm, an offset range of 30-40, and utilizes 14x1.5 (Cone seat, 22mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2025 Jeep Recon Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Center Bore (Hub Bore) | 71.5 mm |
| Offset Range (ET) | 30-40 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x127 is commonly referred to as 5x5" in US Standard.
2025 Recon — Year-Specific Fitment Context
The 2025 Jeep Recon is in year 2 of 3 using the 5x127 pattern (2024–2026). Wheels from any 2024–2026 Jeep Recon are cross-compatible with the 2025 model.
Jeep Recon Bolt Pattern by Year
Looking for all generations? View the complete Jeep Recon (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Recon's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Jeep Recon Wheel Interchange & Donor Fitment Guide (5x127)
The 5x127 bolt pattern is shared by 295 vehicles in our database (moderately common). For safe wheel swaps on the 2025 Jeep Recon, donor rims must match the 5x127 PCD and have a center bore of at least 71.5 mm:
DIRECT HUB MATCH Same 5x127 Pattern & Exact 71.5mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Chrysler Grand Caravan | 71.6 mm (Exact) | 40-45 | 14x1.5 (Flat) |
| 2006 Chrysler Pacifica | 71.5 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 2019 Chrysler Pacifica Hybrid | 71.5 mm (Exact) | 50 | 12x1.5 (Cone) |
| 2009 Chrysler Town & Country | 71.6 mm (Exact) | 40 | N 12x1.50 (Cone) |
| 2020 Chrysler Voyager | 71.5 mm (Exact) | 40-50mm | M14x1.5 (Cone) |
| 2024 Dodge Charger | 71.6 mm (Exact) | 18-25 | 14x1.5 (Cone) |
HUB RING FITMENT Same 5x127 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1994 Cadillac Fleetwood | 78.3 mm | 78.3mm → 71.5mm |
12 |
| 1992 GMC Safari Cargo | 78.1 mm | 78.1mm → 71.5mm |
0 |
| 1992 GMC Safari Passenger | 78.1 mm | 78.1mm → 71.5mm |
0 |
| 1996 GMC Savana 1500 Cargo | 78.1 mm | 78.1mm → 71.5mm |
20-30 |
| 1996 GMC Savana 1500 Passenger | 78.1 mm | 78.1mm → 71.5mm |
20-30 |
| 1992 Land Rover Range Rover | 78.1 mm | 78.1mm → 71.5mm |
50 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Jeep Recon — Frequently Asked Questions
What is the bolt pattern for a 2025 Jeep Recon?
The 2025 Jeep Recon uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 30-40mm.
What other years of Jeep Recon have the same bolt pattern as the 2025?
The Jeep Recon uses the 5x127 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Why is matching the 71.5mm center bore important for the 2025 Recon?
The 71.5mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2025 Jeep Recon?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2025 Jeep?
The 2025 Recon uses a 5x127 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2025 Jeep Recon?
Yes, but ensure the wheel spacers match the 5x127 bolt pattern and 71.5mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →