2024 Jeep Recon Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Jeep Recon, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Lug Nut / Bolt Size | M14x1.5 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 30-40mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x127 is commonly referred to as 5x5" in US Standard.
2024 Recon — Year-Specific Fitment Context
The 2024 is the only model year of the Jeep Recon in our database using the 5x127 bolt pattern.
5x127 Pattern Context
This bolt pattern appears on 236 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x127:
Expert Buying Guide for 2024 Jeep Recon
The 2024 Jeep Recon uses a 5x127 bolt pattern with a 71.5mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations and ensure proper load distribution. The recommended offset range is 30-40mm; deviating may cause clearance issues with suspension or body components. Always use M14x1.5 lug nuts with the correct seat type (cone or ball) to avoid wheel loosening. Failure to match thread pitch and seat can lead to dangerous wheel separation. Verify all specifications before installation.
Historical Fitment Data Reference
In our dataset, Jeep Recon appears from 2024 to 2024 (1 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 70.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 71.5mm bore is specific to this model.
- ✅ Check inner clearance for offset changes; even 5mm deviation can cause rubbing on brake calipers or suspension arms.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Jeep Recon — Frequently Asked Questions
What is the bolt pattern for a 2024 Jeep Recon?
The 2024 Jeep Recon uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 30-40mmmm.
How do I measure the bolt pattern on my 2024 Jeep?
The 2024 Recon uses a 5x127 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 30-40mmmm offset mean for the 2024 Recon?
An offset of 30-40mmmm means the wheel's mounting surface is 30-40mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Jeep.
What lug nut size does the 2024 Jeep Recon use?
The 2024 Jeep Recon uses M14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2024 Jeep Recon?
The OEM offset for the 2024 Recon is typically around 30-40mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2024 Jeep Recon?
Refer to your owner's manual for exact specs, but always tighten the M14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset