2000 Jeep Grand Cherokee Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Jeep Grand Cherokee, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Lug Nut / Bolt Size | N 1/2" |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2000 Grand Cherokee — Year-Specific Fitment Context
The 2000 model year marks the beginning of the Jeep Grand Cherokee's 5x127 bolt pattern era, which continued through 2024 (25 consecutive years). Wheels from any 2000–2024 Jeep Grand Cherokee are cross-compatible with the 2000 model. Note: the 1999 model used a different pattern (5x114.3), so its wheels are NOT interchangeable with the 2000. Across its full production run (1993–2024), the Grand Cherokee has also used: 5x114.3.
Jeep Grand Cherokee Bolt Pattern by Year
The table below shows how the Grand Cherokee's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1993 | 5x114.3 | 71.6 | 25 |
| 1994 | 5x114.3 | 71.6 | 25 |
| 1995 | 5x114.3 | 71.6 | 25 |
| 1996 | 5x114.3 | 71.6 | 25 |
| 1997 | 5x114.3 | 71.6 | 25 |
| 1998 | 5x114.3 | 71.6 | 25 |
| 1999 | 5x114.3 | 71.6 | 25 |
| ▸ 2000 | 5x127 | 71.6 | 50 |
| 2001 | 5x127 | 71.6 | 50 |
| 2002 | 5x127 | 71.6 | 50 |
| 2003 | 5x127 | 71.6 | 50 |
| 2004 | 5x127 | 71.6 | 50 |
| 2005 | 5x127 | 71.6 | 50 |
| 2006 | 5x127 | 71.6 | 50 |
| 2007 | 5x127 | 71.6 | 50 |
| 2008 | 5x127 | 71.6 | 50 |
| 2009 | 5x127 | 71.6 | 50 |
| 2010 | 5x127 | 71.6 | 50 |
| 2011 | 5x127 | 71.6 | 50 |
| 2012 | 5x127 | 71.6 | 50 |
| 2013 | 5x127 | 71.6 | 50 |
| 2014 | 5x127 | 71.6 | 50 |
| 2015 | 5x127 | 71.6 | 50 |
| 2016 | 5x127 | 71.6 | 50 |
| 2017 | 5x127 | 71.6 | 50 |
| 2018 | 5x127 | 71.6 | 50 |
| 2019 | 5x127 | 71.6 | 50 |
| 2020 | 5x127 | 71.5 | 56 |
| 2021 | 5x127 | 71.5 | 56 |
| 2022 | 5x127 | 71.5 | 56 |
| 2023 | 5x127 | 71.5 | 56 |
| 2024 | 5x127 | 71.5 | 56 |
Fitment Notes
The 2000 Jeep Grand Cherokee has a bolt pattern of 5x127.
Imperial Conversion: This bolt pattern is commonly referred to as 5x5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x5".
This means it is a 5 lug pattern with a circle diameter of 127mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Jeep Grand Cherokee appears from 1993 to 2024 (32 model years).
Across model years, this model appears with 2 bolt patterns (5x114.3, 5x127).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 31.0 mm
5x127 Pattern Context
This bolt pattern appears on 236 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x127:
2000 Jeep Grand Cherokee — Frequently Asked Questions
What is the bolt pattern for a 2000 Jeep Grand Cherokee?
The 2000 Jeep Grand Cherokee uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 50mm.
What other years of Jeep Grand Cherokee have the same bolt pattern as the 2000?
The Jeep Grand Cherokee uses the 5x127 pattern from 2000 through 2024. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Can I use 1999 Jeep Grand Cherokee wheels on a 2000?
No. The 1999 Grand Cherokee used a 5x114.3 bolt pattern, which differs from the 2000's 5x127. They are not interchangeable.
What lug nut size does the 2000 Jeep Grand Cherokee use?
The 2000 Jeep Grand Cherokee uses N 1/2" lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2000 Jeep Grand Cherokee?
The factory center bore (hub bore) for the 2000 Jeep Grand Cherokee is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2000 Jeep Grand Cherokee?
Absolutely. Just ensure the aftermarket wheels have a 5x127 bolt pattern, an offset near 50mm, and a center bore of at least 71.6mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Jeep Grand Cherokee has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1993-2024 (32 model years).
- Observed bolt-pattern variants: 2 (5x114.3, 5x127).
- Observed total offset span across years: 31.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2000 Jeep Grand Cherokee, please report it via our About page contact so we can verify and update this record.