2008 Dodge Magnum Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Dodge Magnum, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 22 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 Magnum — Year-Specific Fitment Context
The 2008 model year is the final year of the Dodge Magnum's 5x115 bolt pattern run (since 2005). Wheels from any 2005–2008 Dodge Magnum are cross-compatible with the 2008 model.
Dodge Magnum Bolt Pattern by Year
The table below shows how the Magnum's wheel specifications have changed over the years. The 2008 model year is highlighted.
Fitment Notes
The 2008 Dodge Magnum has a bolt pattern of 5x115.
This means it is a 5 lug pattern with a circle diameter of 115mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Dodge Magnum appears from 2005 to 2008 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
2008 Dodge Magnum — Frequently Asked Questions
What is the bolt pattern for a 2008 Dodge Magnum?
The 2008 Dodge Magnum uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 22mm.
What other years of Dodge Magnum have the same bolt pattern as the 2008?
The Dodge Magnum uses the 5x115 pattern from 2005 through 2008. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Why is matching the 71.6mm center bore important for the 2008 Magnum?
The 71.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 2008 Dodge Magnums use lug bolts or lug nuts?
The 2008 Magnum requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2008 Dodge?
The 2008 Magnum uses a 5x115 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2008 Dodge Magnum?
The factory center bore (hub bore) for the 2008 Dodge Magnum is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Dodge Magnum is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2005-2008 (4 model years).
- Observed bolt-pattern variants: 1 (5x115).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2008 Dodge Magnum, please report it via our About page contact so we can verify and update this record.