2010 Dodge Ram 3500 Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Dodge Ram 3500 Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 121.3 mm |
| Offset (ET) | 43 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2010 Ram 3500 Crew Cab — Year-Specific Fitment Context
The 2010 is the only model year of the Dodge Ram 3500 Crew Cab in our database using the 8x165.1 bolt pattern.
Fitment Notes
The 2010 Dodge Ram 3500 Crew Cab has a bolt pattern of 8x165.1.
Imperial Conversion: This bolt pattern is commonly referred to as 8x6.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 8x6.5".
This means it is a 8 lug pattern with a circle diameter of 165.1mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Dodge Ram 3500 Crew Cab appears from 2010 to 2010 (1 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
2010 Dodge Ram 3500 Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2010 Dodge Ram 3500 Crew Cab?
The 2010 Dodge Ram 3500 Crew Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 121.3mm and the offset is 43mm.
What does 43mm offset mean for the 2010 Ram 3500 Crew Cab?
An offset of 43mm means the wheel's mounting surface is 43mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Dodge.
Why is matching the 121.3mm center bore important for the 2010 Ram 3500 Crew Cab?
The 121.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2010 Dodge Ram 3500 Crew Cab?
Yes, but ensure the wheel spacers match the 8x165.1 bolt pattern and 121.3mm center bore. Also verify that you have enough thread engagement for your 9/16 hardware.
Do 2010 Dodge Ram 3500 Crew Cabs use lug bolts or lug nuts?
The 2010 Ram 3500 Crew Cab requires 9/16 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2010 Dodge Ram 3500 Crew Cab?
The factory center bore (hub bore) for the 2010 Dodge Ram 3500 Crew Cab is 121.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Dodge Ram 3500 Crew Cab is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2010-2010 (1 model years).
- Observed bolt-pattern variants: 1 (8x165.1).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2010 Dodge Ram 3500 Crew Cab, please report it via our About page contact so we can verify and update this record.