2008 Dodge Sprinter 2500 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Dodge Sprinter 2500 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 18 |
| Center Bore (CB) | 121.3 mm |
| Offset (ET) | 25 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2008 Sprinter 2500 Cargo — Year-Specific Fitment Context
The 2008 Dodge Sprinter 2500 Cargo is in year 6 of 7 using the 8x165.1 pattern (2003–2009). Wheels from any 2003–2009 Dodge Sprinter 2500 Cargo are cross-compatible with the 2008 model.
Dodge Sprinter 2500 Cargo Bolt Pattern by Year
The table below shows how the Sprinter 2500 Cargo's wheel specifications have changed over the years. The 2008 model year is highlighted.
Fitment Notes
The 2008 Dodge Sprinter 2500 Cargo has a bolt pattern of 8x165.1.
Imperial Conversion: This bolt pattern is commonly referred to as 8x6.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 8x6.5".
This means it is a 8 lug pattern with a circle diameter of 165.1mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Dodge Sprinter 2500 Cargo appears from 2003 to 2009 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
2008 Dodge Sprinter 2500 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2008 Dodge Sprinter 2500 Cargo?
The 2008 Dodge Sprinter 2500 Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 121.3mm and the offset is 25mm.
What other years of Dodge Sprinter 2500 Cargo have the same bolt pattern as the 2008?
The Dodge Sprinter 2500 Cargo uses the 8x165.1 pattern from 2003 through 2009. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2008 Dodge Sprinter 2500 Cargo?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 25mm, and a center bore of at least 121.3mm (using hub rings if larger).
Will wheels from another Dodge fit my 2008 Sprinter 2500 Cargo?
Only if they share the exact same 8x165.1 bolt pattern, a compatible offset, and a center bore equal to or larger than 121.3mm.
What is the PCD for a 2008 Dodge Sprinter 2500 Cargo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 Sprinter 2500 Cargo, the PCD is 8x165.1.
What is the factory wheel offset for a 2008 Dodge Sprinter 2500 Cargo?
The OEM offset for the 2008 Sprinter 2500 Cargo is typically around 25mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Dodge Sprinter 2500 Cargo is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2003-2009 (7 model years).
- Observed bolt-pattern variants: 1 (8x165.1).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2008 Dodge Sprinter 2500 Cargo, please report it via our About page contact so we can verify and update this record.