1995 Eagle Summit Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Eagle Summit, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1995 Summit — Year-Specific Fitment Context
The 1995 Eagle Summit is in year 4 of 5 using the 4x114.3 pattern (1992–1996). Wheels from any 1992–1996 Eagle Summit are cross-compatible with the 1995 model.
Eagle Summit Bolt Pattern by Year
The table below shows how the Summit's wheel specifications have changed over the years. The 1995 model year is highlighted.
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 1995 Eagle Summit
For your 1995 Eagle Summit, the 4x114.3 bolt pattern is shared with 1992–1996 models, but the 67.1mm center bore is critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is 35-45mm; deviating outside this can cause rubbing or poor handling. Always use M12x1.5 lug nuts with the correct seat (cone or ball) matching your wheel. Improper lug nuts can loosen or damage studs. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Eagle Summit appears from 1992 to 1996 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings for aftermarket wheels to match the 67.1mm bore.
- ✅ Stick to 35-45mm offset; lower offset may rub fenders, higher may contact suspension.
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 Eagle Summit — Frequently Asked Questions
What is the bolt pattern for a 1995 Eagle Summit?
The 1995 Eagle Summit uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mmmm.
What other years of Eagle Summit have the same bolt pattern as the 1995?
The Eagle Summit uses the 4x114.3 pattern from 1992 through 1996. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
What does 35-45mmmm offset mean for the 1995 Summit?
An offset of 35-45mmmm means the wheel's mounting surface is 35-45mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Eagle.
How tight should I torque the lug nuts on a 1995 Eagle Summit?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Eagle fit my 1995 Summit?
Only if they share the exact same 4x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Can I put aftermarket wheels on my 1995 Eagle Summit?
Absolutely. Just ensure the aftermarket wheels have a 4x114.3 bolt pattern, an offset near 35-45mmmm, and a center bore of at least 67.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset