1996 Ford Club Wagon Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Ford Club Wagon, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 1/2 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
1996 Club Wagon — Year-Specific Fitment Context
The 1996 Ford Club Wagon is in year 5 of 7 using the 5x139.7 pattern (1992–1998). Wheels from any 1992–1998 Ford Club Wagon are cross-compatible with the 1996 model.
Ford Club Wagon Bolt Pattern by Year
The table below shows how the Club Wagon's wheel specifications have changed over the years. The 1996 model year is highlighted.
Fitment Notes
The 1996 Ford Club Wagon has a bolt pattern of 5x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 5x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x5.5".
This means it is a 5 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ford Club Wagon appears from 1992 to 1998 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
1996 Ford Club Wagon — Frequently Asked Questions
What is the bolt pattern for a 1996 Ford Club Wagon?
The 1996 Ford Club Wagon uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 0-15mmmm.
What other years of Ford Club Wagon have the same bolt pattern as the 1996?
The Ford Club Wagon uses the 5x139.7 pattern from 1992 through 1998. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
What does 0-15mmmm offset mean for the 1996 Club Wagon?
An offset of 0-15mmmm means the wheel's mounting surface is 0-15mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
What lug nut size does the 1996 Ford Club Wagon use?
The 1996 Ford Club Wagon uses 1/2 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Ford fit my 1996 Club Wagon?
Only if they share the exact same 5x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 87.1mm.
Why is matching the 87.1mm center bore important for the 1996 Club Wagon?
The 87.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ford Club Wagon is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1998 (7 model years).
- Observed bolt-pattern variants: 1 (5x139.7).
- Observed total offset span across years: 15.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1996 Ford Club Wagon, please report it via our About page contact so we can verify and update this record.