1994 Ford Club Wagon Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Ford Club Wagon, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 1/2 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
1994 Club Wagon — Year-Specific Fitment Context
The 1994 Ford Club Wagon is in year 3 of 7 using the 5x139.7 pattern (1992–1998). Wheels from any 1992–1998 Ford Club Wagon are cross-compatible with the 1994 model.
Ford Club Wagon Bolt Pattern by Year
The table below shows how the Club Wagon's wheel specifications have changed over the years. The 1994 model year is highlighted.
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Expert Buying Guide for 1994 Ford Club Wagon
For your 1994 Ford Club Wagon, the 5x139.7 bolt pattern and 87.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 108mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 0-15mm; deviations risk rubbing or bearing stress. Use only 1/2" lug nuts with the correct thread pitch (likely 1/2-20) and a 60-degree conical seat—never ball seat. Re-torque after 50-100 miles. Wheels from 1992-1998 Club Wagons are direct fit.
Historical Fitment Data Reference
In our dataset, Ford Club Wagon appears from 1992 to 1998 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a bore larger than 87.1mm to avoid vibration.
- ✅ Stick to offset between 0 and 15mm; negative offset can cause rubbing on the fender or suspension.
- ✅ Re-torque lug nuts to 100-110 ft-lbs after 50-100 miles; use a torque wrench to prevent over-tightening.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 Ford Club Wagon — Frequently Asked Questions
What is the bolt pattern for a 1994 Ford Club Wagon?
The 1994 Ford Club Wagon uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 0-15mmmm.
What other years of Ford Club Wagon have the same bolt pattern as the 1994?
The Ford Club Wagon uses the 5x139.7 pattern from 1992 through 1998. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
What does 0-15mmmm offset mean for the 1994 Club Wagon?
An offset of 0-15mmmm means the wheel's mounting surface is 0-15mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Will wheels from another Ford fit my 1994 Club Wagon?
Only if they share the exact same 5x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 87.1mm.
Can I put aftermarket wheels on my 1994 Ford Club Wagon?
Absolutely. Just ensure the aftermarket wheels have a 5x139.7 bolt pattern, an offset near 0-15mmmm, and a center bore of at least 87.1mm (using hub rings if larger).
What lug nut size does the 1994 Ford Club Wagon use?
The 1994 Ford Club Wagon uses 1/2 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset