2001 Suzuki Esteem Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Suzuki Esteem, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 108.1 mm |
| Offset (ET) | 25 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2001 Esteem — Year-Specific Fitment Context
The 2001 Suzuki Esteem is in year 7 of 8 using the 5x139.7 pattern (1995–2002). Wheels from any 1995–2002 Suzuki Esteem are cross-compatible with the 2001 model.
Suzuki Esteem Bolt Pattern by Year
The table below shows how the Esteem's wheel specifications have changed over the years. The 2001 model year is highlighted.
Fitment Notes
The 2001 Suzuki Esteem has a bolt pattern of 5x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 5x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x5.5".
This means it is a 5 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Suzuki Esteem appears from 1995 to 2002 (8 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
2001 Suzuki Esteem — Frequently Asked Questions
What is the bolt pattern for a 2001 Suzuki Esteem?
The 2001 Suzuki Esteem uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 108.1mm and the offset is 25mm.
What other years of Suzuki Esteem have the same bolt pattern as the 2001?
The Suzuki Esteem uses the 5x139.7 pattern from 1995 through 2002. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
What is the center bore of a 2001 Suzuki Esteem?
The factory center bore (hub bore) for the 2001 Suzuki Esteem is 108.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2001 Suzuki?
The 2001 Esteem uses a 5x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2001 Suzuki Esteem use?
The 2001 Suzuki Esteem uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2001 Suzuki Esteem?
Yes, but ensure the wheel spacers match the 5x139.7 bolt pattern and 108.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Suzuki Esteem is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1995-2002 (8 model years).
- Observed bolt-pattern variants: 1 (5x139.7).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2001 Suzuki Esteem, please report it via our About page contact so we can verify and update this record.