2025 Ford Commercial Chassis Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Ford Commercial Chassis is 8x170. It has a center bore of 125.2 mm, an offset range of 40-55, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 165 ft-lbs (224 Nm).
2025 Ford Commercial Chassis Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Center Bore (Hub Bore) | 125.2 mm |
| Offset Range (ET) | 40-55 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 165 ft-lbs (224 Nm) |
2025 Commercial Chassis — Year-Specific Fitment Context
The 2025 Ford Commercial Chassis is in year 2 of 3 using the 8x170 pattern (2024–2026). Wheels from any 2024–2026 Ford Commercial Chassis are cross-compatible with the 2025 model.
Ford Commercial Chassis Bolt Pattern by Year
Looking for all generations? View the complete Ford Commercial Chassis (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Commercial Chassis's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Ford Commercial Chassis Wheel Interchange & Donor Fitment Guide (8x170)
The 8x170 bolt pattern is shared by 197 vehicles in our database (uncommon). For safe wheel swaps on the 2025 Ford Commercial Chassis, donor rims must match the 8x170 PCD and have a center bore of at least 125.2 mm:
DIRECT HUB MATCH Same 8x170 Pattern & Exact 125.2mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2002 Ford F350 Super Duty Super Cab | 125.1 mm (Exact) | 40 | 14x1.5 (Cone) |
| 2025 Ford E-450 | 125.2 mm (Exact) | Not Applicable | 14x1.5 (Flat) |
| 2025 Ford F-250 | 125.2 mm (Exact) | 40-45 | 14x1.5 (Flat) |
| 2025 Ford F-350 | 125.2 mm (Exact) | 40-45 | 14x1.5 (Flat) |
| 2025 Ford F-450 | 125.2 mm (Exact) | 40-45 | 14x1.5 (Flat) |
| 2025 Ford F-550 | 125.2 mm (Exact) | Not Applicable | 14x1.5 (Flat) |
HUB RING FITMENT Same 8x170 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2015 Ford F250 Super Duty Crew Cab | 125.7 mm | 125.7mm → 125.2mm |
40 |
| 2014 Ford F250 Super Duty Super Cab | 125.7 mm | 125.7mm → 125.2mm |
40 |
| 2017 Ford F350 Super Duty Regular Cab | 125.7 mm | 125.7mm → 125.2mm |
40 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 165 ft-lbs (224 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Ford Commercial Chassis — Frequently Asked Questions
What is the bolt pattern for a 2025 Ford Commercial Chassis?
The 2025 Ford Commercial Chassis uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 125.2mm and the offset is 40-55mm.
What other years of Ford Commercial Chassis have the same bolt pattern as the 2025?
The Ford Commercial Chassis uses the 8x170 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the factory wheel offset for a 2025 Ford Commercial Chassis?
The OEM offset for the 2025 Commercial Chassis is typically around 40-55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2025 Ford?
The 2025 Commercial Chassis uses a 8x170 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2025 Ford Commercial Chassis?
Yes, but ensure the wheel spacers match the 8x170 bolt pattern and 125.2mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What does 40-55mm offset mean for the 2025 Commercial Chassis?
An offset of 40-55mm means the wheel's mounting surface is 40-55mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →