2000 Ford Contour Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Ford Contour, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x108 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 63.3 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2000 Contour — Year-Specific Fitment Context
The 2000 model year is the final year of the Ford Contour's 4x108 bolt pattern run (since 1995). Wheels from any 1995–2000 Ford Contour are cross-compatible with the 2000 model.
Ford Contour Bolt Pattern by Year
The table below shows how the Contour's wheel specifications have changed over the years. The 2000 model year is highlighted.
4x108 Pattern Context
This bolt pattern appears on 76 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x108:
Expert Buying Guide for 2000 Ford Contour
For your 2000 Ford Contour, the bolt pattern is 4x108 with a center bore of 63.3mm. When selecting aftermarket wheels, ensure the bolt pattern matches exactly. Hub-centric rings are essential to adapt larger center bores to the 63.3mm hub, preventing vibrations and ensuring proper load distribution. The offset range is 35-45mm; staying within this range maintains suspension geometry and prevents rubbing. Using wheels with incorrect offset can cause premature bearing wear or tire contact with the fender. Always use lug nuts with M12x1.5 thread pitch and the correct seat type (conical or ball seat) matching the wheel. Improper lug nuts can lead to wheel loosening. Verify all specifications before installation.
Historical Fitment Data Reference
In our dataset, Ford Contour appears from 1995 to 2000 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibrations and stress on studs.
- ✅ Check for clearance with brake calipers and suspension components, especially with lower offsets near 35mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Ford Contour — Frequently Asked Questions
What is the bolt pattern for a 2000 Ford Contour?
The 2000 Ford Contour uses a 4x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.3mm and the offset is 35-45mmmm.
What other years of Ford Contour have the same bolt pattern as the 2000?
The Ford Contour uses the 4x108 pattern from 1995 through 2000. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Do 2000 Ford Contours use lug bolts or lug nuts?
The 2000 Contour requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2000 Ford Contour?
The factory center bore (hub bore) for the 2000 Ford Contour is 63.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2000 Ford Contour?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2000 Ford Contour?
Yes, but ensure the wheel spacers match the 4x108 bolt pattern and 63.3mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset