1998 Ford Contour Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1998 Ford Contour, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x108 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 63.3 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1998 Contour — Year-Specific Fitment Context
The 1998 Ford Contour is in year 4 of 6 using the 4x108 pattern (1995–2000). Wheels from any 1995–2000 Ford Contour are cross-compatible with the 1998 model.
Ford Contour Bolt Pattern by Year
The table below shows how the Contour's wheel specifications have changed over the years. The 1998 model year is highlighted.
Fitment Notes
The 1998 Ford Contour has a bolt pattern of 4x108.
This means it is a 4 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ford Contour appears from 1995 to 2000 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
4x108 Pattern Context
This bolt pattern appears on 76 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x108:
1998 Ford Contour — Frequently Asked Questions
What is the bolt pattern for a 1998 Ford Contour?
The 1998 Ford Contour uses a 4x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.3mm and the offset is 35-45mmmm.
What other years of Ford Contour have the same bolt pattern as the 1998?
The Ford Contour uses the 4x108 pattern from 1995 through 2000. Wheels from any of these model years are dimensionally compatible with the 1998, provided the offset and center bore also match.
What is the center bore of a 1998 Ford Contour?
The factory center bore (hub bore) for the 1998 Ford Contour is 63.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 1998 Ford?
The 1998 Contour uses a 4x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Ford fit my 1998 Contour?
Only if they share the exact same 4x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.3mm.
What is the factory wheel offset for a 1998 Ford Contour?
The OEM offset for the 1998 Contour is typically around 35-45mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Editorial Fitment Notes
Ford Contour is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1995-2000 (6 model years).
- Observed bolt-pattern variants: 1 (4x108).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1998 Ford Contour, please report it via our About page contact so we can verify and update this record.