2000 Ford Crown Victoria Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Ford Crown Victoria, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 1/2" (20 UNF) |
| Center Bore (CB) | 70.5 mm |
| Offset (ET) | 10 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2000 Crown Victoria — Year-Specific Fitment Context
The 2000 Ford Crown Victoria is in year 9 of 20 using the 5x114.3 pattern (1992–2011). Wheels from any 1992–2011 Ford Crown Victoria are cross-compatible with the 2000 model.
Ford Crown Victoria Bolt Pattern by Year
The table below shows how the Crown Victoria's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 70.5 | 10 |
| 1993 | 5x114.3 | 70.5 | 10 |
| 1994 | 5x114.3 | 70.5 | 10 |
| 1995 | 5x114.3 | 70.5 | 10 |
| 1996 | 5x114.3 | 70.5 | 10 |
| 1997 | 5x114.3 | 70.5 | 10 |
| 1998 | 5x114.3 | 70.5 | 10 |
| 1999 | 5x114.3 | 70.5 | 10 |
| ▸ 2000 | 5x114.3 | 70.5 | 10 |
| 2001 | 5x114.3 | 70.5 | 10 |
| 2002 | 5x114.3 | 70.5 | 50 |
| 2003 | 5x114.3 | 70.5 | 50 |
| 2004 | 5x114.3 | 70.5 | 50 |
| 2005 | 5x114.3 | 70.5 | 50 |
| 2006 | 5x114.3 | 70.5 | 50 |
| 2007 | 5x114.3 | 70.5 | 50 |
| 2008 | 5x114.3 | 70.5 | 50 |
| 2009 | 5x114.3 | 70.5 | 50 |
| 2010 | 5x114.3 | 70.5 | 50 |
| 2011 | 5x114.3 | 70.5 | 50 |
Fitment Notes
The 2000 Ford Crown Victoria has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ford Crown Victoria appears from 1992 to 2011 (20 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 40.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2000 Ford Crown Victoria — Frequently Asked Questions
What is the bolt pattern for a 2000 Ford Crown Victoria?
The 2000 Ford Crown Victoria uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 10mm.
What other years of Ford Crown Victoria have the same bolt pattern as the 2000?
The Ford Crown Victoria uses the 5x114.3 pattern from 1992 through 2011. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
What is the PCD for a 2000 Ford Crown Victoria?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 Crown Victoria, the PCD is 5x114.3.
How tight should I torque the lug nuts on a 2000 Ford Crown Victoria?
Refer to your owner's manual for exact specs, but always tighten the N 1/2" (20 UNF) hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2000 Ford Crown Victoria?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 70.5mm center bore. Also verify that you have enough thread engagement for your N 1/2" (20 UNF) hardware.
Can I put aftermarket wheels on my 2000 Ford Crown Victoria?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 10mm, and a center bore of at least 70.5mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ford Crown Victoria is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-2011 (20 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 40.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2000 Ford Crown Victoria, please report it via our About page contact so we can verify and update this record.