2007 Ford E150 Super Duty Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Ford E150 Super Duty Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2007 E150 Super Duty Cargo — Year-Specific Fitment Context
The 2007 model year is the final year of the Ford E150 Super Duty Cargo's 8x165.1 bolt pattern run (since 2003). Wheels from any 2003–2007 Ford E150 Super Duty Cargo are cross-compatible with the 2007 model.
Ford E150 Super Duty Cargo Bolt Pattern by Year
The table below shows how the E150 Super Duty Cargo's wheel specifications have changed over the years. The 2007 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2007 Ford E150 Super Duty Cargo
For your 2007 Ford E150 Super Duty Cargo, the 8x165.1 bolt pattern is shared with 2003-2007 models. The critical center bore of 124.9mm must match aftermarket wheels; if larger, use hub-centric rings to prevent vibration. Offset must stay within 0-15mm to avoid rubbing or bearing stress. Always use 9/16" lug nuts with the correct thread pitch (likely 9/16-18) and ensure the seat type (cone or ball) matches the wheel. Improper seating can cause wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Ford E150 Super Duty Cargo appears from 2003 to 2007 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to manufacturer spec (typically 140-165 ft-lbs) after 50-100 miles.
- ✅ Verify aftermarket wheels have a center bore ≥124.9mm; use hub-centric rings if larger.
- ✅ Check that lug nuts match the wheel's seat type (cone vs. ball) to avoid loosening.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Ford E150 Super Duty Cargo — Frequently Asked Questions
What is the bolt pattern for a 2007 Ford E150 Super Duty Cargo?
The 2007 Ford E150 Super Duty Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 0-15mmmm.
What other years of Ford E150 Super Duty Cargo have the same bolt pattern as the 2007?
The Ford E150 Super Duty Cargo uses the 8x165.1 pattern from 2003 through 2007. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Will wheels from another Ford fit my 2007 E150 Super Duty Cargo?
Only if they share the exact same 8x165.1 bolt pattern, a compatible offset, and a center bore equal to or larger than 124.9mm.
What is the factory wheel offset for a 2007 Ford E150 Super Duty Cargo?
The OEM offset for the 2007 E150 Super Duty Cargo is typically around 0-15mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 124.9mm center bore important for the 2007 E150 Super Duty Cargo?
The 124.9mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2007 Ford E150 Super Duty Cargo?
The factory center bore (hub bore) for the 2007 Ford E150 Super Duty Cargo is 124.9mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset