2000 Ford Econoline E350 Super Duty Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Ford Econoline E350 Super Duty Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2000 Econoline E350 Super Duty Cargo — Year-Specific Fitment Context
The 2000 Ford Econoline E350 Super Duty Cargo is in year 2 of 4 using the 8x165.1 pattern (1999–2002). Wheels from any 1999–2002 Ford Econoline E350 Super Duty Cargo are cross-compatible with the 2000 model.
Ford Econoline E350 Super Duty Cargo Bolt Pattern by Year
The table below shows how the Econoline E350 Super Duty Cargo's wheel specifications have changed over the years. The 2000 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2000 Ford Econoline E350 Super Duty Cargo
For your 2000 Ford Econoline E350 Super Duty Cargo, the 8x165.1 bolt pattern is shared with 1999–2002 models. The critical center bore is 124.9mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the studs. Offset range is 0-15mm; staying within this range avoids rubbing on suspension or body. Always use the correct lug nuts: 9/16" thread with a cone or ball seat matching the wheel's taper. Never use incorrect seat type—this can cause wheel loosening. Re-torque after 50-100 miles. Verify wheel load rating exceeds vehicle GVWR.
Historical Fitment Data Reference
In our dataset, Ford Econoline E350 Super Duty Cargo appears from 1999 to 2002 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a bore larger than 124.9mm to prevent vibration and stud stress.
- ✅ Re-torque lug nuts to 140-165 ft-lbs after 50-100 miles; check periodically.
- ✅ Avoid wheels with offset outside 0-15mm to prevent tire rubbing on suspension or fenders.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Ford Econoline E350 Super Duty Cargo — Frequently Asked Questions
What is the bolt pattern for a 2000 Ford Econoline E350 Super Duty Cargo?
The 2000 Ford Econoline E350 Super Duty Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 0-15mmmm.
What other years of Ford Econoline E350 Super Duty Cargo have the same bolt pattern as the 2000?
The Ford Econoline E350 Super Duty Cargo uses the 8x165.1 pattern from 1999 through 2002. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Can I use spacers on my 2000 Ford Econoline E350 Super Duty Cargo?
Yes, but ensure the wheel spacers match the 8x165.1 bolt pattern and 124.9mm center bore. Also verify that you have enough thread engagement for your 9/16 hardware.
Why is matching the 124.9mm center bore important for the 2000 Econoline E350 Super Duty Cargo?
The 124.9mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2000 Ford Econoline E350 Super Duty Cargo?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 0-15mmmm, and a center bore of at least 124.9mm (using hub rings if larger).
What is the center bore of a 2000 Ford Econoline E350 Super Duty Cargo?
The factory center bore (hub bore) for the 2000 Ford Econoline E350 Super Duty Cargo is 124.9mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset