2020 Ford F150 SuperCrew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Ford F150 SuperCrew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x135 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 F150 SuperCrew Cab — Year-Specific Fitment Context
The 2020 Ford F150 SuperCrew Cab is in year 17 of 21 using the 6x135 pattern (2004–2024). Wheels from any 2004–2024 Ford F150 SuperCrew Cab are cross-compatible with the 2020 model. Across its full production run (2001–2024), the F150 SuperCrew Cab has also used: 5x135.
Ford F150 SuperCrew Cab Bolt Pattern by Year
The table below shows how the F150 SuperCrew Cab's wheel specifications have changed over the years. The 2020 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x135 | 87.1 | 14 |
| 2002 | 5x135 | 87.1 | 14 |
| 2003 | 5x135 | 87.1 | 14 |
| 2004 | 6x135 | 87.1 | 44 |
| 2005 | 6x135 | 87.1 | 44 |
| 2006 | 6x135 | 87.1 | 44 |
| 2007 | 6x135 | 87.1 | 44 |
| 2008 | 6x135 | 87.1 | 44 |
| 2009 | 6x135 | 87.1 | 44 |
| 2010 | 6x135 | 87.1 | 44 |
| 2011 | 6x135 | 87.1 | 44 |
| 2012 | 6x135 | 87.1 | 44 |
| 2013 | 6x135 | 87.1 | 44 |
| 2014 | 6x135 | 87.1 | 44 |
| 2015 | 6x135 | 87.1 | 44 |
| 2016 | 6x135 | 87.1 | 44 |
| 2017 | 6x135 | 87.1 | 44 |
| 2018 | 6x135 | 87.1 | 44 |
| 2019 | 6x135 | 87.1 | 44 |
| ▸ 2020 | 6x135 | 87.1 | 44 |
| 2021 | 6x135 | 87.1 | 44 |
| 2022 | 6x135 | 87.1 | 44 |
| 2023 | 6x135 | 87.1 | 44 |
| 2024 | 6x135 | 87.1 | 44 |
6x135 Pattern Context
This bolt pattern appears on 147 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x135:
Expert Buying Guide for 2020 Ford F150 SuperCrew Cab
For your 2020 Ford F150 SuperCrew Cab, the 6x135 bolt pattern is shared with all 2004–2024 F150 SuperCrew models, ensuring broad cross-compatibility. However, the 87.1mm center bore is critical: aftermarket wheels often have larger bores, requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The factory offset is 44mm; deviations beyond ±10mm may cause rubbing or clearance issues with suspension and brakes. Always verify lug nut thread pitch (14x1.5) and seat type—factory uses cone seats. Using incorrect lug nuts (e.g., ball seat) can lead to wheel detachment. For safety, re-torque after 50–100 miles and avoid mixing steel and aluminum wheels without proper hardware.
Historical Fitment Data Reference
In our dataset, Ford F150 SuperCrew Cab appears from 2001 to 2024 (24 model years). Across model years, this model appears with 2 bolt patterns (5x135, 6x135).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 30.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 150 ft-lb after 50–100 miles of driving to account for settling.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 87.1mm bore; otherwise, vibrations may occur.
- ✅ Avoid using wheels from 2001–2003 F150 models (5x135 pattern) as they are not compatible with your 6x135 hub.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Ford F150 SuperCrew Cab — Frequently Asked Questions
What is the bolt pattern for a 2020 Ford F150 SuperCrew Cab?
The 2020 Ford F150 SuperCrew Cab uses a 6x135 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 44mm.
What other years of Ford F150 SuperCrew Cab have the same bolt pattern as the 2020?
The Ford F150 SuperCrew Cab uses the 6x135 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
Do 2020 Ford F150 SuperCrew Cabs use lug bolts or lug nuts?
The 2020 F150 SuperCrew Cab requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2020 Ford F150 SuperCrew Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 F150 SuperCrew Cab, the PCD is 6x135.
How do I measure the bolt pattern on my 2020 Ford?
The 2020 F150 SuperCrew Cab uses a 6x135 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 87.1mm center bore important for the 2020 F150 SuperCrew Cab?
The 87.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset